Slant Six Forum https://slantsix.org/forum/
maybe sound isnt so good... https://slantsix.org/forum/viewtopic.php?t=56251	Page 1 of 1

---

Author:	80aspande [ Mon Sep 22, 2014 4:45 am ]
Post subject:	maybe sound isnt so good...
ok maybe my ideal of a loppy sounding cam isnt so good looking at the given rpm range on them cams what is left out there for as cams no i cant seam to find much on my own is this list still any good http://users.hal-pc.org/~bwhitejr/Slant_Six_Cams.pdf i do plan to port the head shave it and i have a nice intake manifold maybe and maybe a header just finding the parts is the fun part car already has 3.55 gears and a 2500 stall with shift kit also was looking at using the 198 rods to make a stroker motor and reading about using 2.2l dodge pistons very cool info and lastly how do i reply with in the same post

---

Author:	wjajr [ Mon Sep 22, 2014 6:26 am ]
Post subject:
Click on the little button: "POST REPLY" below post. Text box will come up, and start pecking away.

---

Author:	nm9stheham [ Mon Sep 22, 2014 6:26 am ]
Post subject:
Look below the posts in a thread and you should see a little oval shaped button with the words 'Post Reply" in the symbol. Click on that and your browser will pop up a new screen; type your reply in the grey box and scroll down and click on the button that says 'Submit"; that will add your new reply to the thread.

---

Author:	80aspande [ Mon Sep 22, 2014 9:26 am ]
Post subject:
this is my reply

---

Author:	nm9stheham [ Mon Sep 22, 2014 10:19 am ]
Post subject:
It works!

---

Author:	wjajr [ Mon Sep 22, 2014 2:48 pm ]
Post subject:
Dang!

---

Author:	80aspande [ Mon Sep 22, 2014 5:00 pm ]
Post subject:
yea seams to work this time ...i tried it last time and it didn't ...thanks guys now to the slant six info is that all there is as for cams out there or ones that have been made to pick from?

---

Page 1 of 1	All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/