Just Got an estimate from Muffler King here in Kirkland, Wa for $650.00 to install 2.25" from manifold back using my own muffler and 2.00" from muffler to their resonator out.
Thought I had seen many folks saying they paid less.
Anyone make comparison costs or have suggestions?out
Thanks all.
John

_________________
Psychics will soon lead dogs to your body!

1963 Dodge Dart 270 convertible

"It depends". For a stock manifold setup, that is pricy. If they are using stainless mandrel bends and tig'ing it together that may be ok. If it's typical aluminized pipe they are bending themselves and mig'ing together then you may be paying about 2-3 times too much especially with your own muffler.

Their muffler(Magnaflow), 2" aluminized pipe Manifold back, bending themselves and mig'd together with chrome tip! $350 + tax (Central Texas)

_________________
1964 Dart GT

Thanks DA!

_________________
Psychics will soon lead dogs to your body!

1963 Dodge Dart 270 convertible

I paid $300 for 2.5" from the extra thick 2.5" manifold flange on back with my own mufflers and stainless steel square tip.

_________________
Aggressive Ted

http://cid-32f1e50ddb40a03c.photos.live ... %20Swinger


74 Swinger, 9.5 comp 254/.435 lift cam, 904, ram air, electric fans, 2.5" HP2 & FM70 ex, 1920 Holley#56jet, 2.76 8 3/4 Sure-Grip, 26" tires, 25+MPG