| Slant Six Forum https://slantsix.org/forum/ |
|
| Oil pan for Chrysler 225. https://slantsix.org/forum/viewtopic.php?t=56754 |
Page 1 of 1 |
| Author: | Steve-Maine [ Sat Dec 20, 2014 12:54 pm ] |
| Post subject: | Oil pan for Chrysler 225. |
I'm rebuilding a Chrysler Industrial 225 engine. The oil pan was rusted out. Does it take a regular 225 oil pan. I think in earley 70"s. How do you post pictures. thanks |
|
| Author: | Reed [ Sat Dec 20, 2014 1:19 pm ] |
| Post subject: | |
All slant six oil pans will bolt to all slant six blocks, but you have to (a) match the oil pickup tube to thepan being used and (b) make sure you have clearance in your application for the pan. How do you post pictures? CLICK ME to find out. |
|
| Author: | Steve-Maine [ Sun Dec 21, 2014 1:29 pm ] |
| Post subject: | Oil pan for 225 engine |
So I can use any oil pan as long as I get oil pick up tube that goes with oil pan ? Its going in a brush chipper so can used any oil pan. slant six oil pans will bolt to all slant six blocks, but you have to (a) match the oil pickup tube to thepan being used and (b) make sure you have clearance in your application for the pan. How do you post pictures? CLICK ME to find out.[/quote] |
|
| Author: | GTS225 [ Sun Dec 21, 2014 2:58 pm ] |
| Post subject: | |
Steve; Was your original pan a rear sump, mid sump, or the hardly ever seen front sump version? Roger |
|
| Author: | ProCycle [ Sun Dec 21, 2014 3:03 pm ] |
| Post subject: | |
Quote: Steve; Was your original pan a rear sump, mid sump, or the hardly ever seen front sump version?
Gasp! What application used a front sump? Knowing that could be really helpful for my future Frankenstein project. EDIT: Never mind, found it. 60s pickup trucks. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|