The block on the left is a 170, the one on the right is a 225.
The deck is much taller on the 225 block.
CJ
| Slant Six Forum https://slantsix.org/forum/ |
|
| Engine data https://slantsix.org/forum/viewtopic.php?t=56791 |
Page 1 of 1 |
| Author: | suitbear [ Fri Dec 26, 2014 5:25 am ] |
| Post subject: | Engine data |
I have a 1960 Valiant with a slant six. When I bought it the seller said the engine was an engine from a 1965 car. He said it was not the 170 that was in the car originally. How can I verify that? Where can I go to search the block/head casting numbers to see if it is a 170 or a 225? Thank you for the info on this in advance. |
|
| Author: | ProCycle [ Fri Dec 26, 2014 8:01 am ] |
| Post subject: | |
Here's one helpful chart: http://www.slantsix.org/articles/parts-matrix/jpg.htm And check this thread: http://www.slantsix.org/forum/viewtopic ... 471d7d3516 |
|
| Author: | ceej [ Sat Dec 27, 2014 10:36 am ] |
| Post subject: | |
The block on the left is a 170, the one on the right is a 225. The deck is much taller on the 225 block. CJ |
|
| Author: | slantzilla [ Sat Dec 27, 2014 10:08 pm ] |
| Post subject: | |
Bypass hose between the head and water pump is about an inch long on a 170. It's about 3 inches on a 198/225. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|