i'm in, need to upgrade to the stronger ARP's
The duster is wounded
Kev
| Slant Six Forum https://slantsix.org/forum/ |
|
| 220,000 lb Arp head studs https://slantsix.org/forum/viewtopic.php?t=56957 |
Page 1 of 10 |
| Author: | moparfrank [ Tue Jan 20, 2015 7:54 pm ] |
| Post subject: | 220,000 lb Arp head studs |
I am finally getting my turbo'd slant project back on track. Tom, Ryan and a few others special ordered some 220,000 lb Arp head studs a few years back to eliminate stretched head studs with 30lbs of boost. I will be doing the same unless someone still has a set to sell. Is anyone interested in getting a group order together? |
|
| Author: | Dart270 [ Wed Jan 21, 2015 9:15 am ] |
| Post subject: | |
I would be up for a set, or maybe 2, depending on price. Best and thanks, Lou |
|
| Author: | ProCycle [ Wed Jan 21, 2015 9:51 am ] |
| Post subject: | |
I'm going to need a set. I'm in. |
|
| Author: | Will [ Wed Jan 21, 2015 1:06 pm ] |
| Post subject: | |
Count me in Please. Will |
|
| Author: | DadTruck [ Wed Jan 21, 2015 5:08 pm ] |
| Post subject: | |
I'll take a set .. how much does this let one raise the installed torque? |
|
| Author: | moparfrank [ Wed Jan 21, 2015 7:28 pm ] |
| Post subject: | |
I'll check on prices next week and see what our options are. |
|
| Author: | Rick Covalt [ Thu Jan 22, 2015 3:15 am ] |
| Post subject: | |
I'm interested Rick |
|
| Author: | Shaker223 [ Fri Jan 23, 2015 6:20 pm ] |
| Post subject: | |
It has been about 5 years but I think each set cost around $185/set with a minimum of 5 sets. I torqued mine to 92ft/lbs. Tom |
|
| Author: | ProCycle [ Fri Jan 23, 2015 7:01 pm ] |
| Post subject: | |
They are $99 here --> http://www.northernautoparts.com/part/ar-142-4001 These are the 200,000 psi studs. Not the 220,000 psi studs. |
|
| Author: | moparfrank [ Fri Jan 30, 2015 7:08 pm ] |
| Post subject: | |
The 200,000 lb stock studs are actually 190,000 lb. I finally got ahold of someone at ARP to get us a price. They will get back to me a a couple of days with a price on 5, 10, 15 sets of studs. The material that is the 220,000 lb is their proprietary material they call ARP 2000. It can be torqued to 95 ft lbs max. Tom was very close at 92 ft lbs. |
|
| Author: | Shaker223 [ Sun Feb 01, 2015 7:47 pm ] |
| Post subject: | |
I just did some simple algebra to come up with the number. At the time, they did not have a recommendation. Who are you dealing with at ARP? |
|
| Author: | the_engineers [ Mon Feb 02, 2015 10:25 am ] |
| Post subject: | |
I'd be interested, depending on price. |
|
| Author: | 1974duster kev [ Tue Feb 03, 2015 10:29 pm ] |
| Post subject: | |
i'm in, need to upgrade to the stronger ARP's The duster is wounded Kev |
|
| Author: | 1974duster kev [ Wed Feb 11, 2015 8:40 am ] |
| Post subject: | |
Any news on pricing? I will be purchasing a set very soon! Kev |
|
| Author: | moparfrank [ Thu Feb 12, 2015 7:21 am ] |
| Post subject: | |
No news yet. I have been dealing with Alex and getting the run around. I will try again today. They must be so busy that they're not be interested in custom orders. He never return calls and if by chance you get ahold of him he says the estimator still has it. |
|
| Page 1 of 10 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|