| Slant Six Forum https://slantsix.org/forum/ |
|
| 7.25 carrier bearing https://slantsix.org/forum/viewtopic.php?t=56987 |
Page 1 of 1 |
| Author: | John Deville [ Sun Jan 25, 2015 4:10 pm ] |
| Post subject: | 7.25 carrier bearing |
I got up to the point where I was setting up my carrier to go back into the housing,.... when the carrier unit came out,... the races and two other large shims came out with the carrier. Both of which sat on the outside of the races. Can and or would anyone name these larger shims? they go to the left and the right outside the carrier races. I had a forty year old one crack on me, as a result of the attempted install. Despite working by my self and trying to work it in gently. Currently working with Jaws gear to get it back together. Thanks |
|
| Author: | bcschief [ Sun Jan 25, 2015 4:53 pm ] |
| Post subject: | |
If this is a early a those are selective fit they come in different thicknesses. Brian |
|
| Author: | tractorfix [ Mon Feb 16, 2015 5:28 am ] |
| Post subject: | |
They're pretty tough to work on without the spreader tool |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|