| Slant Six Forum https://slantsix.org/forum/ |
|
| Timing Chain Splash Guard ? https://slantsix.org/forum/viewtopic.php?t=57272 |
Page 1 of 1 |
| Author: | engstrom997 [ Thu Mar 12, 2015 1:32 pm ] |
| Post subject: | Timing Chain Splash Guard ? |
So in the process of putting back together my slant six I went to put on the Oil Slinger **Edited after doing some site searching** that goes on under the time chain cover. Directing excess oil away from the seal and toward the chain/sprocket is my guess. The thing is tore up pretty bad not sure how it got this way but when I took it apart it wasn't pretty. See Pic below.  Can I clean this up and make it work or should I try and find another one? Any help would be great thanks!!! |
|
| Author: | SlantSixDan [ Thu Mar 12, 2015 2:03 pm ] |
| Post subject: | |
Think of it this way, which is less hassle: Opening up the engine again to deal with the noise you really wish weren't being caused by that chewed-up oil slinger? Or spending thirteen bucks on a new one so you never have to worry about it? |
|
| Author: | nm9stheham [ Thu Mar 12, 2015 2:15 pm ] |
| Post subject: | |
Yeah, you DON'T want to re-use that one. Looks like someone forced it on with the key slot mis-aligned and the just degraded from there. |
|
| Author: | engstrom997 [ Thu Mar 12, 2015 2:15 pm ] |
| Post subject: | |
Thanks Dan, Your right my luck it would break up more and then make noise like crazy. Thanks for the link I am going to get one coming!! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|