| Slant Six Forum https://slantsix.org/forum/ |
|
| Honing Plate https://slantsix.org/forum/viewtopic.php?t=57373 |
Page 1 of 1 |
| Author: | Duster George [ Thu Mar 26, 2015 7:41 pm ] |
| Post subject: | Honing Plate |
Hi Guys I am working on my leaning tower of power and had a machine shop create a precision honing plate to properly bore and hone my block. If anyone is interested I can make the plate available for your project. If anyone is interested please let me know. Thanks George |
|
| Author: | Dart270 [ Fri Mar 27, 2015 4:55 am ] |
| Post subject: | |
Thanks very much for the offer, George. I imagine there will be some folks on the upper east coast (or elsewhere) who would want to use this plate. Best wishes, Lou |
|
| Author: | Greg Ondayko [ Fri Mar 27, 2015 5:43 am ] |
| Post subject: | |
Cool, Thanks George, I had one "made" by cutting off the top of a garabage block... then Machined flat. I have had some other users on the forum borrow it at times. If you come to Carlisle (PA) in the summer for the Mopar show, I am usually there. Stop by and say hello. Greg |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|