Slant Six Forum
https://slantsix.org/forum/

turbo flange
https://slantsix.org/forum/viewtopic.php?t=57801
Page 1 of 1

Author:  '67 Dart 270 [ Wed Jun 03, 2015 5:00 pm ]
Post subject:  turbo flange

FYI, I saw this on ebay:

http://www.ebay.com/itm/Slant-6-Six-Dod ... 0f&vxp=mtr

brian

Author:  '67 Dart 270 [ Thu Jun 04, 2015 8:38 am ]
Post subject:  flange

What does this thick flange do for turbo folks? I'm not that familiar with turbo/boost builds, so I'm wondering what this does for folks.

Seems if it were thicker yet you could drill/tap and put injectors there.

brian

Author:  '67 Dart 270 [ Thu Jun 04, 2015 8:41 am ]
Post subject:  injectors

it would be a lot easier to drill/tap because it wouldn't be at a funky angle like when you machine an intake...or is that angle critical to point the injectors directly toward the intake ports? I.e. they would be orthogonal in my scenario, not at the appropriate angle?

brian

Author:  Serj22 [ Thu Jun 04, 2015 4:39 pm ]
Post subject: 

The flange is so you can weld pipe to it to build your own intake/exhaust setup. It's not like a spacer or anything, though I guess it could be.

Author:  dartsport76 [ Thu Jun 04, 2015 5:51 pm ]
Post subject:  Opinion...

In my opinion, it's a complete hoax piece the dude slapped 'TURBO' in the title and is looking to sell to suckers who want to turbo their slant but don't know much about slants or turbos. That piece is a 1 piece intake/exhaust flange, if I understand correctly, which leads to two questions:

WHY WOULD YOU WANT TO BUILD A INTAKE AND EXHAUST ON THE SAME FLANGE?!

And especially on a turbo motor where a hot IAT is undesirable?

What does this part have to do at all with exhaust driven forced induction?

Author:  kesteb [ Thu Jun 04, 2015 10:32 pm ]
Post subject: 

"Headers by Ed" sells a single flange like this one. The turbo charged Finnish Dart that was floating around the net a couple years ago used a single flange like this one.

The only problem that I see is expansion of the flange went it gets hot.

Author:  CNC-Dude [ Sat Jun 06, 2015 8:04 am ]
Post subject:  Re: turbo flange

Quote:
Yeah, this persons product has nothing to do with a turbo application, he is just sticking on the word "turbo" in the description to reel you in.

You need something more like this below:

T04
<img src="http://imagizer.imageshack.us/v2/150x10 ... 0BuDJI.jpg" border="0">

or this:

T03
<img src="http://imagizer.imageshack.us/v2/150x10 ... NdX21T.jpg" border="0">

Author:  mopars biggest fan [ Tue Jun 30, 2015 2:12 pm ]
Post subject: 

Thats a nice thick flange it would work great for a turbo setup nice find

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/