Thanks Dan!
Yes the truck is a 1980 model and did have a Holley 1945 that the previous owner replaced with a rebuilt 1920. I have no idea where the rebuilt carburetor came from but it does it's job well. Lucky me.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Anyone wanna take a stab at decoding the engine in my truck? https://slantsix.org/forum/viewtopic.php?t=57813 |
Page 1 of 1 |
| Author: | drgonzo [ Thu Jun 04, 2015 11:26 am ] |
| Post subject: | Anyone wanna take a stab at decoding the engine in my truck? |
Numbers on machined surface on top of block on passenger side: G225R 119 Casting number on driver side of block: 2806830-6 Aluminum 1v intake with EGR. What ya think? |
|
| Author: | SlantSixDan [ Thu Jun 04, 2015 11:38 am ] |
| Post subject: | Re: Anyone wanna take a stab at decoding the engine in my tr |
Quote: G225R 119
G: 1971 model year225: Engine displacement R: Passenger car engine 119: Built on 19 January 1971 Quote: Casting number on driver side of block: 2806830-6
Jibes with stamping.Quote: Aluminum 1v intake with EGR.
Swapped on from a later engine.
|
|
| Author: | drgonzo [ Thu Jun 04, 2015 11:52 am ] |
| Post subject: | |
Thanks Dan! Yes the truck is a 1980 model and did have a Holley 1945 that the previous owner replaced with a rebuilt 1920. I have no idea where the rebuilt carburetor came from but it does it's job well. Lucky me.
|
|
| Author: | SlantSixDan [ Thu Jun 04, 2015 12:24 pm ] |
| Post subject: | |
If that intake is aluminum, it's a Feather Duster/Dart Lite piece. |
|
| Author: | drgonzo [ Thu Jun 04, 2015 12:30 pm ] |
| Post subject: | |
Is is in fact aluminum, well a magnet falls right off it. |
|
| Author: | Reed [ Thu Jun 04, 2015 1:22 pm ] |
| Post subject: | |
You know, that intake manifold is not good. You probably need to send me that truck right now before it blows up on you. I might even pay shipping costs. Seriously though, that is a BEAUTIFUL truck. More pictures are always appreciated! |
|
| Author: | coconuteater64 [ Thu Jun 04, 2015 3:04 pm ] |
| Post subject: | |
Love that truck!  Much nicer than either one of mine. My engine says H225-81-155. Anybody wanna crack that one? |
|
| Author: | drgonzo [ Thu Jun 04, 2015 6:02 pm ] |
| Post subject: | |
Thanks guys....the pictures make it look better than it is. |
|
| Author: | SlantSixDan [ Thu Jun 04, 2015 6:52 pm ] |
| Post subject: | |
Quote: My engine says H225-81-155
H: 1972 model year225: Engine displacement 81-155: Mis-stamped or misread. |
|
| Author: | coconuteater64 [ Thu Jun 04, 2015 8:50 pm ] |
| Post subject: | |
Thanks! |
|
| Author: | Nicademas [ Thu Jun 04, 2015 11:52 pm ] |
| Post subject: | |
love the four headlights on those trucks. Take care to keep that ram hood emblem. there now $170 for a knock off on classic industrys..... |
|
| Author: | drgonzo [ Wed Jun 10, 2015 6:36 pm ] |
| Post subject: | |
What about this set of numbers? FW225R 2995 118 2896830-2 I gave it a shot... Assembled Oct 9, 1970 at the Windsor plant. What say ye SSD? |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|