| Slant Six Forum https://slantsix.org/forum/ |
|
| Another Push Rod https://slantsix.org/forum/viewtopic.php?t=58516 |
Page 1 of 1 |
| Author: | neilskiw [ Sat Oct 10, 2015 3:41 pm ] |
| Post subject: | Another Push Rod |
Greetings, rough idle. #3 plug has juice, but when wire removed, no change. Vacuum pulses between 10 -15. Swapping spark plugs and wires makes no difference. Remove valve cover....  Number 3 intake push rod just laying there... sad  So now what? Beat on the valve stem with a hammer? Spray magic potion around valve spring? put in another rod and see if it bends and gets spit out? Any reasonable recommendation appreciated. Thanks! |
|
| Author: | Nicademas [ Sat Oct 10, 2015 7:32 pm ] |
| Post subject: | |
Is the adjuster tighting up? |
|
| Author: | neilskiw [ Sat Oct 10, 2015 9:30 pm ] |
| Post subject: | |
The adjuster isn't all backed out like the push rod was loose and just fell out, and then bent itself. The rocker is free and the valve train is all clean. Wha do wha do wha do i do ???????? |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|