| Slant Six Forum https://slantsix.org/forum/ |
|
| 2 barrel carburator on clifford intake https://slantsix.org/forum/viewtopic.php?t=60058 |
Page 1 of 1 |
| Author: | Magnumforce1987 [ Wed Aug 17, 2016 7:08 pm ] |
| Post subject: | 2 barrel carburator on clifford intake |
Hey guys and gals, I got this slant six on my 68 barracuds fastback. I installed a clifford intake manifold (with Carter 2 barrel carburator adapter plate) and headers. Anyways...my carter 2 barrel carburators mounting holes doesnt match the holes to the 2 barrel adapter adapter plate. Am I missing something? |
|
| Author: | moparhotrods [ Wed Aug 17, 2016 7:45 pm ] |
| Post subject: | |
if you got the 2 barrel adapter plate from clifford you will need to run a Holley 350 CFM or 500 CFM carb. if you need one let me know I have a couple of them I could sell one |
|
| Author: | DusterIdiot [ Wed Aug 17, 2016 9:23 pm ] |
| Post subject: | Yep... |
You will need to get a Mr. Gasket #1937 to complete the adaption for a BBD to fit on a clifford... I would surmise that the plenum would be huge compared to the BBD and not function as well, so the Holley might be the better bet (and save a 1/2" of adaptor height and the added cost)... |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|