Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Nov 28, 2024 3:36 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 19 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Fri Sep 04, 2015 8:50 am 
Offline
1 BBL (New)

Joined: Thu Sep 03, 2015 8:49 pm
Posts: 2
Car Model:
Hello,
I have used the Paddock and LMCTruck catalogs for fixing up chevys. But is there a one stop shop where I could find most reproduction parts for a 1962 dodge lancer. Looking for a catalog that would have carpet, correct seat covers, headliner, wiring harnesses, body panels, correct factory under hood decals, etc. These were easy to come by for chevy's, anything out there for early A-bodies polara, lancer, dart? Thanks


Top
   
PostPosted: Fri Sep 04, 2015 10:32 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
Quote:
Hello,
I have used the Paddock and LMCTruck catalogs for fixing up chevys. But is there a one stop shop where I could find most reproduction parts for a 1962 dodge lancer.
No, there is not. It's going to be many-stop shopping for that car (ask the man who owns one!).
Quote:
carpet, headliner
www.stockinteriors.com -- their Lancer listings might still be incomplete; in that case just look under '62 Plymouth Valiant.
Quote:
correct seat covers
That's going to be various levels of difficult and costly depending on how correct you need them to be. www.smsautofabrics.com will probably have your original materials; you can expect to pay big money and endure unreliable-at-best customer disservice from them. There may be other options depending on which model your Lancer is (170, 770, GT) and what body style (2-door, 4-door or wagon).
Quote:
wiring harnesses
Not available off the shelf. Evans Wiring can make you a new engine wiring harness, and can incorporate improvements such as main circuit protection, see here.
Quote:
body panels
Mostly not available. Floor pan repair sections for '60-'66 A-body cars show up on eBay from time to time.
Quote:
correct factory under hood decals
Not many decals under the hood of a '62 Lancer. The coolant, battery, and air cleaner decals can be had from Gary Goers and a few other vendors. See here.
Quote:
These were easy to come by for chevy's
Well...yeah. You can almost build a brand new one of any of the popular Chev or Ford models out of catalogues. That is not the case for less-appreciated cars like the '62 Lancer and other early A-bodies.
Quote:
anything out there for early A-bodies polara, lancer, dart? Thanks
The Polara's not an A-body, and the Dart's not an A-body until the '63 model year.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Last edited by SlantSixDan on Tue Sep 08, 2015 9:08 am, edited 6 times in total.

Top
   
 Post subject:
PostPosted: Mon Sep 07, 2015 8:24 pm 
Offline
1 BBL (New)

Joined: Thu Sep 03, 2015 8:49 pm
Posts: 2
Car Model:
Thank you so much, that's a great help


Top
   
 Post subject:
PostPosted: Tue Sep 08, 2015 8:14 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14491
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
Does anyone make a replacement gas tank for the 60-62 Valiant/Lancer?

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Tue Sep 08, 2015 9:11 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
Quote:
Does anyone make a replacement gas tank for the 60-62 Valiant/Lancer?
No such tank. '60-'61 is one tank, '62 is another. They are not available new until someone will send a tank to The Mopar Dude or his vendor to use as a pattern. There has been some discussion of using a '63 tank (available, but very different) in a '62 car; some people say it can't be made to fit well enough and others say it can.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Tue Sep 08, 2015 9:49 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14491
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
Thanks Dan. :D

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject: gas tanks
PostPosted: Mon Sep 14, 2015 7:28 am 
Offline
EFI Slant 6

Joined: Tue Jun 03, 2003 9:42 pm
Posts: 358
Location: San Diego, California
Car Model:
I am currently modifying a 63 dart gt tank to fit my 61 valiant. The main fit issue is the part around the spare tire well. At first glance the filler tube and tank positioning indents look to line up with the 61 body. The tank strap needed to be replaced it was 1 inch or so too short. And I will use a 63 sender so some wiring may need to be adapted. This project still belongs under the category "with enough cutting and welding it can be made to fit".

Does a 62 have the round spare tire well like the 63, or the rectangular one like the 61 (and I assume 60)?


Top
   
 Post subject:
PostPosted: Mon Sep 14, 2015 11:19 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
'60-'61 has the square/bathtub spare tire well; '62 is round.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Mon Sep 14, 2015 11:30 am 
Offline
Turbo Slant 6
User avatar

Joined: Wed Apr 30, 2003 6:43 pm
Posts: 976
Location: SoCal
Car Model: Toad Wagon
Does the '63+ Valiant tank fit '62, or even close enough to cobble, or is '62 strictly a one-year tank?

_________________
Sex, drags, and rock & roll.
Dick, 225% crazy.
Hobby (cars, that is) Photos link


Top
   
 Post subject:
PostPosted: Mon Sep 14, 2015 12:28 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
Scroll up 5 posts from this one to see the answer to '63-into-'62.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Mon Sep 14, 2015 12:34 pm 
Offline
Turbo Slant 6
User avatar

Joined: Wed Apr 30, 2003 6:43 pm
Posts: 976
Location: SoCal
Car Model: Toad Wagon
Right. Not sure how I missed the "available, but very different" note on first reading.

Thanks.

_________________
Sex, drags, and rock & roll.
Dick, 225% crazy.
Hobby (cars, that is) Photos link


Top
   
 Post subject:
PostPosted: Mon Sep 14, 2015 5:42 pm 
Offline
EFI Slant 6
User avatar

Joined: Sun Sep 30, 2007 7:15 am
Posts: 418
Location: York NE
Car Model:
My 62 Valiant has a 63 tank. I had to get the 63 sender, move the fuel lines and wire for the gauge but it slips into place on a 62 just fine and the 62 strap fits the same as well on the 63 tank. Fuel fill pipe fits the same.

_________________
Dave

1977 d-200 crew cab ex-army pickup wants it's /6 back
1962 Valiant 2 door, 170, three on the tree
1972 d-100 parts truck
80 volare wagon now a parts car


Top
   
 Post subject:
PostPosted: Mon Sep 14, 2015 6:16 pm 
Offline
Turbo Slant 6
User avatar

Joined: Wed Apr 30, 2003 6:43 pm
Posts: 976
Location: SoCal
Car Model: Toad Wagon
Identical volume?

_________________
Sex, drags, and rock & roll.
Dick, 225% crazy.
Hobby (cars, that is) Photos link


Top
   
 Post subject:
PostPosted: Tue Sep 15, 2015 3:14 pm 
Offline
EFI Slant 6
User avatar

Joined: Sun Sep 30, 2007 7:15 am
Posts: 418
Location: York NE
Car Model:
63 tank is 3 gal bigger, and extends further back around and under spare tire well. I put in a second strap farther back to go with the origonal.

_________________
Dave

1977 d-200 crew cab ex-army pickup wants it's /6 back
1962 Valiant 2 door, 170, three on the tree
1972 d-100 parts truck
80 volare wagon now a parts car


Top
   
 Post subject:
PostPosted: Fri Sep 18, 2015 1:03 pm 
Offline
Turbo Slant 6
User avatar

Joined: Wed Apr 30, 2003 6:43 pm
Posts: 976
Location: SoCal
Car Model: Toad Wagon
Thank you.

I like to have my projects' parts waiting on the shelf when they're needed, and typically plan upgrades at the same time.
This sounds a reasonable cobble for upping the volume in addition, when the tank's time comes.

May need to re-locate the forward struts on my tow hitch, but that's an easy one.

_________________
Sex, drags, and rock & roll.
Dick, 225% crazy.
Hobby (cars, that is) Photos link


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 19 posts ]  Go to page 1 2 Next

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited