| Slant Six Forum https://slantsix.org/forum/ |
|
| Non-AC to AC https://slantsix.org/forum/viewtopic.php?t=60841 |
Page 1 of 1 |
| Author: | zimmerman@bright.net [ Mon Feb 27, 2017 8:58 am ] |
| Post subject: | Non-AC to AC |
Hello, I am converting my 71 Valiant to an AC vehicle from non-AC. Can someone share with me how the belts run? Does there need to be a third pulley on the Engine Shaft? I've got a stock AC compressor and the mounting brackets but none of it really seems to line up without a lot of washers between the main mounting plate and the water pump bolts???? Any help\pix would be greatly appreciated. |
|
| Author: | Reed [ Mon Feb 27, 2017 9:10 am ] |
| Post subject: | |
AC systems had a third pulley on the crankshaft shout that drove the AC compressor. You will need to either track down one of those pulleys or buy one of the single piece three-groove truck dampers avaialble on eBay. |
|
| Author: | zimmerman@bright.net [ Mon Feb 27, 2017 11:57 am ] |
| Post subject: | |
Any guess where I can get such a pulley? |
|
| Author: | Brian [ Mon Feb 27, 2017 1:10 pm ] |
| Post subject: | |
I have a spare one that I can part with. |
|
| Author: | zimmerman@bright.net [ Tue Feb 28, 2017 9:39 am ] |
| Post subject: | |
How much to get it to Tiffin, Ohio? |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|