| Slant Six Forum https://slantsix.org/forum/ |
|
| boring a 225 Slant six https://slantsix.org/forum/viewtopic.php?t=60945 |
Page 1 of 1 |
| Author: | moparhotrods [ Thu Mar 30, 2017 1:53 pm ] |
| Post subject: | boring a 225 Slant six |
okay all you engine builders out there I have a question I am building a long rod 225 and I know using a standard 2.2 piston the bore will be 45 over I want to use a 20 over 2.2 piston can the block be bored 65 over and still have meat on the walls any help is appreciated thank you |
|
| Author: | Dart270 [ Thu Mar 30, 2017 3:42 pm ] |
| Post subject: | |
Yes, plenty of meat left. Most forged crank blocks can be bored at least 0.100 over. Many people have gone 0.140" over or even more. 3.464" will be no problem and is a nice bore size. Lou |
|
| Author: | moparhotrods [ Thu Mar 30, 2017 5:14 pm ] |
| Post subject: | |
thank you |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|