Slant Six Forum
https://slantsix.org/forum/

Rear gate crank coupler
https://slantsix.org/forum/viewtopic.php?t=61138		 Page 1 of 1
Author:  Reactor89 [ Mon May 15, 2017 3:07 pm ]
Post subject:  Rear gate crank coupler
Hello Wagon owners,

Here is an obscure but important part for correctly working wagon rear windows. I'm calling this part the "rear gate crank coupler" and many end up breaking because of poor metal quality.

Image

Image

Considering that these parts break easily, the quantity of these parts are only going to go down future. So before these parts become impossible to find, I measure and documented the part as a 3D model.

Image

Image

If anyone wants to machine and reproduce this parts, feel free to use the files bellow. (These files come with no warranty)

Drawing files:
http://dutra.org/files/3D/gate_coupler.drw
http://dutra.org/files/3D/gate_coupler.dxf

3D models
http://dutra.org/files/3D/gate_coupler.prt
http://dutra.org/files/3D/gate_coupler.igs
http://dutra.org/files/3D/gate_coupler.stl
http://dutra.org/files/3D/gate_coupler.stp
http://dutra.org/files/3D/gate_coupler.pdf

Allen
Author:  emsvitil [ Mon May 15, 2017 5:55 pm ]
Post subject: 
First 2 pictures are just an 'X'
Author:  Greg Ondayko [ Mon May 15, 2017 6:29 pm ]
Post subject: 
Very cool.

Thanks Allen
Author:  Doctor Dodge [ Tue Jun 06, 2017 4:40 pm ]
Post subject: 
Recently... Allen and I had to fix the broken one in his 64 Valiant wagon....
good thing we had a decent replacement in the 'bucket' but...

These things are made of cheap pot metal so it is just a matter of time before the next one breaks.
Hopefully, we can make a few out of better material and then all the 63-66 A-Body wagon owners will be covered. (ALL 4 or 5 or us )
:lol: :roll: :wink:
DD
Author:  Greg Ondayko [ Sat Jun 10, 2017 8:46 am ]
Post subject: 
There are 5 on the east coast as well :D :D :D :D

My wagon is an f body... but these parts and other bits for them shur r nice to have.



Greg
Author:  Mike Andreas [ Thu Jan 11, 2018 1:27 pm ]
Post subject:  Re: Rear gate crank coupler
I have a wagon and my coupler is on it's last legs as well.
Author:  hyper_pak [ Thu Jan 11, 2018 6:32 pm ]
Post subject:  Re: Rear gate crank coupler
Looks a lot like what is in my 62 wagon as well!
Author:  Greg Ondayko [ Fri Jan 12, 2018 6:53 am ]
Post subject:  Re: Rear gate crank coupler
If you send the .stl File of the part to ExOne - THey 3dprint in metal.... You can probably get one made / printed in a week or 2 for probably under $60.


www.exone.com


Greg
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/