Is anyone interested in making a laser-printed glove box for these models? All you can buy is the '63 box, which is folded, not molded. You have to drill out the dash to install it.

_________________
Chuck Rivers, Webmaster

Yes, definitely; and I would take two.
Thanks.
Fred

The thread you're after is here.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Looks like some quality work there Dan


Chuck, follow the link and contact the fellow.

Greg

_________________
http://www.youtube.com/hyperpack

I'm the one in the link as "66dvert" over on the other forum

they are not laser printer or even 3d printed(though I have thought about it for 3dprinting) Casting a good part was near impossible due to the surface tension and sticking to the inner and outer silicone mold even after multiple coats of mold release agent.

I am in the process of making them right now out of ABS. These simple boxes "should" be easy, but they are not! I can make a lot of other parts like kick panels, top convertible rear side panel pieces a lot easier than this "simple box" The vacu-forming process there are a few issued to deal with that I am having a bit of trouble fixing to my satisfaction. Can I make the boxes? Yes for sure is it as good as I would like? NO! I'm currently working on the webbing issue and having to go to a thicker ABS sheet to get a good draw. I will post on both sites after I am sure I can do a run of good (to my satisfaction) glove boxes.

https://www.facebook.com/media/set/?set ... b17e2f8c3e

Not all of us are on Fecebook; will you please consider hosting your pics somewhere that doesn't require membership/log-in?

(matter of fact, I have fecebook.com blocked at my network router and with 127.0.0.1 redirects in my /hosts file; I don't want their grubby little mits anywhere near my ѕhit.)

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

sure .ummm what place is pretty good and free? I haven't looked at any places but it'll be easy to upload em to a new place.

Flickr works, for one. So does Dropbox.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

here is a link to flickr
https://www.flickr.com/gp/66dvert/8Y0VcW
let me know if it works

It works!

_________________
65 Dart station wagon slant 6 - now under construction
47 Dodge Custom 4 Door sedan
87 D100 Short Bed slant 6

Retired USAF 1966-1986
Retired US Postal Service 2004-2014