Slim chance I know, but any leads on either cam?
I know, I know, why?

_________________
Hyper_pak

So,why? No one will know and there are much better running cams, right.

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Get the specs and have Ken at Oregon Cam Regrinding regrind it on an OE core. I am not sure if that is an option for you. If I needed that cam, that is what I might try.

Do those old Hyperpak cams have part numbers stamped on them?

_________________
http://www.youtube.com/hyperpack

Just go to any mower repair shop and grab a cam. Same thing.

_________________
Official Cookie and Mater Tormentor.

You crack me up! And I work in a mower shop!

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Here is the part#/ specs from Dan. I'd like to see the @.050 numbers. That also appears to be a lot of overlap?? But looking at other comments it appears that is about the range the hyperpak like.

Chrysler Hyper Pak camshaft part № 2205 620:
276° intake duration
268° exhaust duration
52° overlap
0.430" lift

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

All fairly good answers, except the lawn mower cam answer, that is totally wrong.

I have never seen one, or the Melling either.
Wondering if they exist.
Not looking for the easy button, looking for the real deal.

_________________
Hyper_pak

Y'don't say! I bet that's a very different proposition now than back in my day.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.