| Slant Six Forum https://slantsix.org/forum/ |
|
| Paint poll https://slantsix.org/forum/viewtopic.php?t=61667 |
Page 1 of 1 |
| Author: | dirtyd100 [ Mon Dec 04, 2017 11:08 am ] |
| Post subject: | Paint poll |
https://drive.google.com/file/d/0B-oguy ... sp=sharing https://drive.google.com/file/d/0B-oguy ... sp=sharing Just doing a quick poll here. Want to know what color combo I should go with. The OD green is the factory military color so it would be easier to cover. Let me know what you guys think. Thanks |
|
| Author: | dirtyd100 [ Mon Dec 04, 2017 12:42 pm ] |
| Post subject: | Re: Paint poll |
This is just a rattle can resto for now until I can get all the running gear fixed/updated. To be honest, some of my students that I teach helped quite a bit with the sanding and prep work on it. 1 student was covered in 20 yr old primer that he sanded off the box side and was smiling from ear to ear. I wish I had more time during the day to teach some of this stuff, but alas it is not an approved curriculum. |
|
| Author: | and739 [ Mon Dec 04, 2017 3:35 pm ] |
| Post subject: | Re: Paint poll |
The green looks pretty tough with the black graphics. Is that vinyl or paint? |
|
| Author: | dirtyd100 [ Mon Dec 04, 2017 6:59 pm ] |
| Post subject: | Re: Paint poll |
Paint, I have a vinyl cutter at work. Just a simple oval with 225 in the middle. the rest I just taped off. |
|
| Author: | emsvitil [ Mon Dec 04, 2017 7:37 pm ] |
| Post subject: | Re: Paint poll |
I like the first one. |
|
| Author: | GreybeardGunner [ Tue Dec 05, 2017 7:35 am ] |
| Post subject: | Re: Paint poll |
I agree with Ed....first one. |
|
| Author: | dirtyd100 [ Wed Dec 06, 2017 6:41 pm ] |
| Post subject: | Re: Paint poll |
Thanks guys, looks like that will have to be on hold till I can get the trans swapped and figure out the funk noise while driving down the highway. Took a little trip today and on my way home the dang thing was almost unbearable to drive at 60 mph. Not sure what the heck is going on but I think it may be the trans/clutch. I guess after 41 years it may be time to do some service to that area of the truck. I think it is still stock components besides the crappy universal 3 spd shifter that I replaced back in 2002. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|