| Slant Six Forum https://slantsix.org/forum/ |
|
| heat soak https://slantsix.org/forum/viewtopic.php?t=62257 |
Page 1 of 1 |
| Author: | paul m [ Wed Apr 25, 2018 4:09 pm ] |
| Post subject: | heat soak |
isw there anyone anywhere that has a heat shield template for a one bbl slant six? |
|
| Author: | SpaceFrank [ Sat Apr 28, 2018 5:24 pm ] |
| Post subject: | Re: heat soak |
Check this old thread: http://slantsix.org/forum/viewtopic.php ... 4&start=75 After a lot of talking and going back and forth, a couple templates were made, but none were ever posted with full dimensions. Most images were also lost to Photobucket, but the images posted by Nomad are still there in the last couple pages of the thread. Looks like he used different colors for the different factory designs that people scanned or traced. It might be a little tedious printing it out and making corrections until you get it right, but you could scale that drawing using the known distance between the carburetor studs. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|