I am going to attempt to digitize all of the simple gaskets as time permits.
These are Laser cut on cardstock for test fitting.
If they are good I will post the drawings up soon.
Greg
| Slant Six Forum https://slantsix.org/forum/ |
|
| When Fel-Pro No Longer Decides to Support Slants https://slantsix.org/forum/viewtopic.php?t=62375 |
Page 1 of 2 |
| Author: | Greg Ondayko [ Mon May 21, 2018 8:27 am ] |
| Post subject: | When Fel-Pro No Longer Decides to Support Slants |
I am going to attempt to digitize all of the simple gaskets as time permits. These are Laser cut on cardstock for test fitting. If they are good I will post the drawings up soon. Greg |
|
| Author: | Reed [ Mon May 21, 2018 10:04 am ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
Awesome, thanks! |
|
| Author: | sandy in BC [ Mon May 21, 2018 10:19 am ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
Moving the sport foreword....thanks |
|
| Author: | Joshie225 [ Mon May 21, 2018 10:55 am ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
If FelPro doesn't support the slant then Best Gasket certainly would. They cover the flathead 6s already. bestgasket.com |
|
| Author: | Greg Ondayko [ Tue May 22, 2018 11:55 am ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
Quote: If FelPro doesn't support the slant then Best Gasket certainly would. They cover the flathead 6s already. bestgasket.com
Good to know Josh, I wasn't aware of that resource. Greg |
|
| Author: | CNC-Dude [ Tue May 22, 2018 4:22 pm ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
I've been making a copper intake/exhaust gasket with large ports for ported heads now for almost 5 years. It was featured in the Slant Sickness article last fall in Mopar Muscle. Guess no body is paying attention. I can do them in a composition style material as well, just haven't. |
|
| Author: | drgonzo [ Wed May 23, 2018 8:52 am ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
CNC-Dude, you have a PM. |
|
| Author: | CNC-Dude [ Wed May 23, 2018 1:14 pm ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
Received! Thanks. |
|
| Author: | Tim Keith [ Sat Apr 13, 2019 9:28 pm ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
https://www.youtube.com/watch?v=5ae4NDjHr4Y |
|
| Author: | terrylittlejohn [ Thu Oct 24, 2019 5:37 am ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
yes I have a copper one! thanks for giving a great replacement option ! |
|
| Author: | CNC-Dude [ Fri Mar 27, 2020 6:58 am ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
Thanks Terry, just trying to give the Slant community options with products and designs to help fill the void when big companies decide to terminate theirs. |
|
| Author: | 74A1Swinger [ Tue Jul 12, 2022 1:48 pm ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
Quote: https://www.youtube.com/watch?v=5ae4NDjHr4Y
|
|
| Author: | volaredon [ Tue Jul 12, 2022 6:33 pm ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
looks like not just Fel Pro. having heard about the Fel pro oil pump gaskets going NLA, I checked Victor Reinz. Same result. Had a "star" by the PN in the online listings I found, footnote says star meant "discontinued". |
|
| Author: | 74A1Swinger [ Thu Jul 14, 2022 10:15 am ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
Quote: looks like not just Fel Pro. having heard about the Fel pro oil pump gaskets going NLA, I checked Victor Reinz. Same result. Had a "star" by the PN in the online listings I found, footnote says star meant "discontinued".
Sounds like they are trying to get everyone to cough up the money to buy the complete engine gasket package every time you want only 1 item. I had to do that in order to get the distributor engine seal.Looks like a nickel and a dime have just gone up in price again! |
|
| Author: | volaredon [ Thu Jul 14, 2022 8:54 pm ] |
| Post subject: | Re: When Fel-Pro No Longer Decides to Support Slants |
There's a guy on the FABO site that a has a huge pile of the distributor o rings (both, never realized that there was 2 of them used to seal a/6 distributor) he had listed for sale over there. Check out "halifaxhops". I got like 3 sets from him a couple of months ago, and recently seen that he still has quite a few. |
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|