Hotrod did another slant article/advertisement this month and they have a TTi mandrel bent exhaust available for slants now. Not really a fan of most of their articles but at least there is something available off the shelf for exhaust now, goes from stock manifolds to tailpipe not too expensive.

I was considering getting a back half from them and having a local shop do the rest (over the axle is a pain to bend) but this is a better option. Only downside is it is 2 1/2" but I think that could be remedied with a resonator before the tailpipe, could even reduce it to 2 1/4" there as well.

http://www.hotrod.com/articles/making-slant-six-sense/

Brandon

_________________
____________________________

https://www.flickr.com/photos/162600228@N03/

I saw that article, but cannot find a listing on the TTI website.....?

sb

I assume you need to call them to order it, (PN A25MWSL6, $360).

I doubt they update the website for something low volume like that, although it is nice to have it available.

Brandon

_________________
____________________________

https://www.flickr.com/photos/162600228@N03/

It would be really cool it TTI built some slant headers!
Jus' sayin'.......

_________________
-MattMan
LEANED & MEAN

A Dutra Duals y-pipe would be on my shopping list.

Same!

_________________
Somehow I ended up owning three 1964 slant six A-bodies. I race one of them.
Escape Velocity Racing