Here are a couple of pictures I took of mine ('74 Dart). The red arrows show where the bolts should go (mine were missing).
Viewed from the rear:
Viewed from beneath:
| Slant Six Forum https://slantsix.org/forum/ |
|
| 1975 Duster transmission; is it supposed to have a mount? https://slantsix.org/forum/viewtopic.php?t=62405 |
Page 1 of 1 |
| Author: | Plymouth_Ruster [ Sun May 27, 2018 6:28 pm ] |
| Post subject: | 1975 Duster transmission; is it supposed to have a mount? |
Just got done taking the engine out of my 1975 duster, and my dad and I noticed that the transmission isn't really mounted to anything but the engine. Is this correct, or is it supposed to be bolted to something that isn't there? |
|
| Author: | Charrlie_S [ Sun May 27, 2018 6:50 pm ] |
| Post subject: | Re: 1975 Duster transmission; is it supposed to have a mount? |
There should be a cross member, between the torsion bar anchors. A rubber mount on top of the cross member, to the bottom of the transmission tail shaft housing. |
|
| Author: | DusterIdiot [ Sun May 27, 2018 7:33 pm ] |
| Post subject: | D |
D |
|
| Author: | Charrlie_S [ Mon May 28, 2018 2:02 am ] |
| Post subject: | Re: 1975 Duster transmission; is it supposed to have a mount? |
Quote: Quote: A rubber mount on top of the cross member, to the bottom of the transmission tail shaft housing.
This is a late A-body so the mount is as Charlie says, but it has a rubber cylinder behind the crossmount with asingle bolt through it (called a spool mount similar to the way your motor mounts work), Here is a picture https://www.rockauto.com/info/60/A2512_01__ra_p.jpg |
|
| Author: | rich006 [ Tue May 29, 2018 9:06 am ] |
| Post subject: | Re: 1975 Duster transmission; is it supposed to have a mount? |
Here are a couple of pictures I took of mine ('74 Dart). The red arrows show where the bolts should go (mine were missing). Viewed from the rear: Viewed from beneath:
|
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|