Slant Six Forum
https://slantsix.org/forum/

TTi Exhaust for slants
https://slantsix.org/forum/viewtopic.php?t=62420
Page 1 of 1

Author:  OGLeanDart270 [ Wed May 30, 2018 7:36 am ]
Post subject:  TTi Exhaust for slants

Hotrod did another slant article/advertisement this month and they have a TTi mandrel bent exhaust available for slants now. Not really a fan of most of their articles but at least there is something available off the shelf for exhaust now, goes from stock manifolds to tailpipe not too expensive.

I was considering getting a back half from them and having a local shop do the rest (over the axle is a pain to bend) but this is a better option. Only downside is it is 2 1/2" but I think that could be remedied with a resonator before the tailpipe, could even reduce it to 2 1/4" there as well.

http://www.hotrod.com/articles/making-slant-six-sense/

Brandon

Author:  mopar_nocar [ Wed May 30, 2018 4:22 pm ]
Post subject:  Re: TTi Exhaust for slants

I saw that article, but cannot find a listing on the TTI website.....?

sb

Author:  OGLeanDart270 [ Wed May 30, 2018 7:13 pm ]
Post subject:  Re: TTi Exhaust for slants

I assume you need to call them to order it, (PN A25MWSL6, $360).

I doubt they update the website for something low volume like that, although it is nice to have it available.

Brandon

Author:  Badvert65 [ Thu May 31, 2018 4:00 pm ]
Post subject:  Re: TTi Exhaust for slants

It would be really cool it TTI built some slant headers!
Jus' sayin'.......

Author:  Tim Keith [ Sun Jun 03, 2018 11:03 pm ]
Post subject:  Re: TTi Exhaust for slants

A Dutra Duals y-pipe would be on my shopping list.

Author:  SpaceFrank [ Tue Jun 05, 2018 7:51 am ]
Post subject:  Re: TTi Exhaust for slants

Quote:
A Dutra Duals y-pipe would be on my shopping list.
Same!

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/