Slant Six Forum https://slantsix.org/forum/ |
|
Intake Manifold / Carb Upgrade Recommendations https://slantsix.org/forum/viewtopic.php?t=62435 |
Page 1 of 1 |
Author: | willyboy37 [ Sun Jun 03, 2018 3:59 am ] |
Post subject: | Intake Manifold / Carb Upgrade Recommendations |
Hi, New forum member and new Slant Six owner (67 Barracuda). My slant has the factory intake with 1 barrel carb. Previous owner put Dutra Duals on the engine with dual exhaust. I would like to "improve" the performance a little by replacing the intake manifold and carb. Knowing there are different options out there (2 barrel, 4 barrel, super six, etc.), I would like to hear from everyone what would be my best options for the dollar. I have no intentions of racing, purely a street car. Thanks in advance for sharing your advice! |
Author: | GTS225 [ Sun Jun 03, 2018 4:35 am ] |
Post subject: | Re: Intake Manifold / Carb Upgrade Recommendations |
Well, the "Super Six", in the later seventies, meant a two-barrel intake and carb, and for a street motor, that's what's going to be the norm for recommendations. Find a slant-powered Volare, Aspen, or light pickup in the salvage yard, and grab the intake/exhaust assembly,along with the carb, air cleaner, and kickdown linkage. (You'll need the kickdown if yours is an auto trans.) If your yard search is fruitless, you might post a wanted ad here, and there may be someone close enough to you that the shipping won't hurt much. Roger |
Author: | willyboy37 [ Sun Jun 03, 2018 5:30 am ] |
Post subject: | Re: Intake Manifold / Carb Upgrade Recommendations |
Hi - Thanks for the quick reply and recommendation. Yes, it is an automatic transmission. I live in t he Detroit suburbs. I will start my search of junkyards per your recommendation. Thanks. If anyone has a super six intake, carb, linkage, etc. please let me know! |
Author: | Rick Covalt [ Sun Jun 03, 2018 5:47 am ] |
Post subject: | Re: Intake Manifold / Carb Upgrade Recommendations |
As expensive as Super Six stuff is getting don't be afraid to run a 500 Edelbrock 4 barrel on an offenhauser intake or similar. No one says you have to run with secondaries open. |
Page 1 of 1 | All times are UTC-08:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |