Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon Dec 02, 2024 9:57 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sat Jan 11, 2003 10:52 am 
Well I bought an induction timing gun. 54 bucks.
Anyway I hooked it up and the timing mark on the pully was at about the 10 o'clock position. about 3-4 inches to the left in relation to the "0" mark. Where about should the timing mark be? I thought it was supposed to be at 5 degrees btdc? So I think that would relate to about 30 degrees btdc. The reason I am checking it is the gas milage is crap after I did the electronic upgrade. and it seems to be missing like crazy at idle, but Power is improved and I don't notice any knocking.
Any advice is appreciated.

Also just to make sure, if the notch is to the passenger side of the "0" thats before right?


Top
   
 Post subject:
PostPosted: Sat Jan 11, 2003 4:33 pm 
Offline
Turbo EFI
User avatar

Joined: Tue Nov 12, 2002 2:50 pm
Posts: 1742
Location: Spokane Valley, WA
Car Model:
Here's a link to a thread on the MMC forum that might help as far as the timing:
http://modernmusclecars.net/forums/show ... hreadid=25

I haven't done the conversion on the Dart yet, so I'm pretty ignorant on the finer points (no pun intended) of the system, but hopefully this might help you a bit.

_________________
'74 Duster w/ HEI ignition, beat to snot suspension, A904, 8.25" 3.55 SG rear, still being tuned up and gets 17 MPG

Know how they always build a better idiot? That's me


Top
   
 Post subject: before?
PostPosted: Sat Jan 11, 2003 11:03 pm 
Offline
EFI Slant 6
User avatar

Joined: Sun Nov 03, 2002 12:08 am
Posts: 340
Location: Seattle, WA
Car Model:
Yes, as your standing in front of the car looking at the grille, the engine turns clockwise. So, if the notch is to the passenger side of the "0", that is advanced, or before TDC.

_________________
'66 Cuda 225/4spd
'66 Dart GT convertible 225/auto
'64 Dart GT 340/4spd


Top
   
 Post subject:
PostPosted: Mon Jan 13, 2003 11:41 pm 
Offline
4 BBL ''Hyper-Pak''
User avatar

Joined: Tue Dec 10, 2002 11:25 pm
Posts: 28
Location: Los Angeles, CA
Car Model:
Is your gun a dial back? you can get a true reading that way. Otherwise your timing indicator plate should go to 10* +/- TDC.


Top
   
PostPosted: Thu Jun 07, 2018 7:20 am 
Offline
4 BBL ''Hyper-Pak''
User avatar

Joined: Fri May 19, 2017 7:19 pm
Posts: 28
Location: Toronto, Canada
Car Model: 1966 Clark Cortez
Been a while since anyone's added to this thread but thought I'd ask which gun folks would suggest. Looking on Amazon there are 4 guns from Innova (using as an example and not a recommendation):

Inductive $50
Advance $84
Digital $118
Digital Pro $150


I've currently got on order the basic inductive since my timing mark has >10 +/- degrees on it so should be fine for my needs. However, I don't have a tach so I'm very tempted to move up to the Digital Pro model which includes built-in tach functionality. Wondering what others have used and if they have any suggestions.

_________________
1966 Clark Cortez Motorhome w/
Industrial Slant 6 looking for adventure!


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot] and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited