Many thanks for the reply. Let me see what turns up in a day or two but I am motivated to get this done.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Need Torqueflight 6 COMPLETE https://slantsix.org/forum/viewtopic.php?t=6309 |
Page 1 of 1 |
| Author: | ksilva [ Thu Jul 17, 2003 10:04 am ] |
| Post subject: | Need Torqueflight 6 COMPLETE |
I have a 64 Valiant Covertible and the transmission is "toast". (Ever seen lots of metal where it's not welcome ?) . I need to completely rebuild from scratch. The damage is so bad I need the case as well as everything else and the case itself is of course different for a push-button trans. I've already gotten some conflicting info about what will or won't fit/work as a replacement so any definitive word on that would be golden. 64 Valiant 225 Slant 6 Automatic - Torqueflight 6 Push-button shifter. I need either a case and/or a used transmission, preferrably one I can rebuild. Any tips or locations to look, (including a parts house that might carry the whole thing) would be appreciated. Many thanks, Kevin Note: I'll also need the extension housing seal for the rear yoke, which is a bolt-on yoke. |
|
| Author: | Dart270 [ Thu Jul 17, 2003 11:41 am ] |
| Post subject: | |
Kevin, Too bad we're so far from LA. I left a rebuildable '64 PB 904 in a garage there. If you hurry, you might get one of the /6 racers to bring a core to Clay City, KY this weekend, and then I could pick it up for you. I do have the built PB trans out of my '64 Dart. It has the V8 guts and about 35k miles on the rebuild (89k when rebuilt). I would need some reasonable bread for this to convince me to sell it, but I could be convinced. Let me know, Lou |
|
| Author: | ksilva [ Thu Jul 17, 2003 11:52 am ] |
| Post subject: | |
Lou, Please call me if you have a minute and maybe something can be worked out. I've just started looking but I am definitely motivated to get this done. If we can help eachother out I'm certainly open for discussion. I'm in Raleigh Home: 877-1092 (I work from home so am there much of the day). Mobile: 272-0814 |
|
| Author: | Doc [ Thu Jul 17, 2003 12:18 pm ] |
| Post subject: | |
I have a few of these PB 904s but I'm on the other side of the country. I would not want much for a core or a good working used tranny but shipping would be a few bucks. DD |
|
| Author: | ksilva [ Thu Jul 17, 2003 12:24 pm ] |
| Post subject: | |
| Many thanks for the reply. Let me see what turns up in a day or two but I am motivated to get this done.
|
|
| Author: | Dart270 [ Fri Jul 18, 2003 5:48 am ] |
| Post subject: | |
Kevin, I am leaving for the weekend at Clay City in a few hours. I'll give you a ring when I get back in town Sunday night or Monday. Another option is that I'm heading to LA in the next month or so, and I could check that other PB 904 on the plane.  For people who know me, you know I'm being serious...Cheers, Lou |
|
| Author: | ksilva [ Mon Jul 21, 2003 9:03 am ] |
| Post subject: | Please give me a call |
My kingdome for a quick phone call today. Both the local options I had for a replacement PB/904 have not panned out, so before I start shipping stuff from across the country I'd love to talk with someone who knows a bit more than me. Local # in N. Raleigh 877-1092 Toll free 888-777-6477. Kevin |
|
| Author: | Dart270 [ Mon Jul 21, 2003 7:49 pm ] |
| Post subject: | |
Kevin, I had a crazy day today - trying to buy a house for the first time! I'll try to call you tomorrow (tues) for a 904 chat. Cheers, Lou |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|