Ditto what Ron just said...
If someone has something they're looking for, post here as well. Some of us may have that thing(s) laying around and just forgot.
(Ain't that right, Joe?
)
| Slant Six Forum https://slantsix.org/forum/ |
|
| 2019 Banquet -- Swap meet https://slantsix.org/forum/viewtopic.php?t=63241 |
Page 1 of 4 |
| Author: | Rick Covalt [ Thu Jan 31, 2019 2:17 pm ] |
| Post subject: | 2019 Banquet -- Swap meet |
Here is the place to post some things you will be bringing to the banquet that you want to get rid of. We may have some more Mopar 'Nuts" that come out for an indoor swap meet in the middle of winter. Some V-8 guys may come and it will be our job to convert them! see ya in March! I made a quick glance around the garage and here are some things I will be bringing. Multiple oil pans- F body and 67-76 A body 4 big bolt rallye wheels, 2 trim rings, unkown if I have centers 2 bolt on front pulleys multiple valve covers 2 intake and exhaust manifolds single barrels starters 2.5" dual exhaust tailpipes off 72 swinger 10 crankshaft bolt, lock plates transmission cooler Super six air cleaner 2 flywheels 2 barrel parts carb, 2280 I think 1 new, 1 piece intake /exhaust flange for building your own intake / exhaust 1/4" thick 87 truck windshield washer tank And I'm sure I have more. |
|
| Author: | ryandcovalt [ Wed Feb 06, 2019 9:03 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
I haven't had a chance to go through the stuff I want to sell yet, but I will have a ton of different things to sell. super six setups, 4 barrel intakes, carbs, ignitions, A body parts, transmissions, etc. Rob has already claimed the slantkota but I will have a lot of things to sell for sure. Not sure if i will get time to make a list or not but there will be a lot of things to sell. I have tables to use to put parts and stuff on so If you are planning to bring stuff to sell send me a PM so I can make sure I have enough set up. |
|
| Author: | Dart270 [ Thu Feb 07, 2019 4:08 am ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Thanks, guys! I have a few things I can list now. 1) Pair of ~99 Sebring seats with integral shoulder belts 2) 10" rear drums and brake parts - worn but probably useable I'm sure I will expand my list. Lou |
|
| Author: | Ron Hamby [ Thu Feb 07, 2019 3:24 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
I am planning to bring a few things too. Just dont have them picked yet. It should be good shopping for Slant 6 guru's. |
|
| Author: | Rob Simmons [ Thu Feb 07, 2019 4:02 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Ditto what Ron just said... If someone has something they're looking for, post here as well. Some of us may have that thing(s) laying around and just forgot. (Ain't that right, Joe? )
|
|
| Author: | joesnow [ Sun Feb 10, 2019 3:14 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Ok ...cool... I have a set of pistons, n some misc. Parts. 3speed truck trans w/shifter |
|
| Author: | sixinthehead [ Sun Feb 10, 2019 7:46 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Ron probably has whatever you might be looking for, but he doesn't know where it is  
|
|
| Author: | ryandcovalt [ Mon Feb 25, 2019 8:44 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
I got out some of my parts to sell. There are more parts, but here are some pictures of what I dug out so far.           
|
|
| Author: | Rob Simmons [ Tue Feb 26, 2019 4:08 am ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Some nice goodies there! If anyone wants to claim parts that isn’t going to the banquet I can help with parts hauling.
|
|
| Author: | Rick Covalt [ Tue Feb 26, 2019 9:42 am ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
I also have a12 or 15 gallon plastic fuel tank in my race car I will probably pull and replace with a small one. If any one needs it I could pull it for the banquet. Also 2 rear sliding windows for D 100 truck. |
|
| Author: | Rob Simmons [ Tue Feb 26, 2019 2:02 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Are you still looking for a smaller one, Rick? I really need to put a list together of stuff I can bring... I also need to start attending "Hoarders Anonymous" meetings...  
|
|
| Author: | Rick Covalt [ Tue Feb 26, 2019 4:46 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
They have aluminum ones on Ebay for $55. So that is what I planned to do. I think I will get a 5 gallon one. Rick |
|
| Author: | joesnow [ Tue Feb 26, 2019 6:51 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Wow Ryan, lots of things I could use... Wheels, gears, ignition box, 5sp, I'm bring just a few things... I might dig deeper to make a few dollars to spend more lol... Parts swap is a great idea... Dan |
|
| Author: | Thebearded1 [ Wed Feb 27, 2019 6:06 am ] | ||
| Post subject: | Re: 2019 Banquet -- Swap meet | ||
I'm looking forward to this so I can find parts for my roadster project! I will be reworking the exhaust soon. I think i'm going to have to make my own header if i don't find a pair of Dutra Duals as space is tight. I'm also going to try re positioning the steering box too.
|
|||
| Author: | Greg Ondayko [ Wed Feb 27, 2019 8:00 am ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Quote: I'm looking forward to this so I can find parts for my roadster project!
Cool. Will be nice to meet you in person!I will be reworking the exhaust soon. I think i'm going to have to make my own header if i don't find a pair of Dutra Duals as space is tight. I'm also going to try re positioning the steering box too. Greg |
|
| Page 1 of 4 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|