| Slant Six Forum https://slantsix.org/forum/ |
|
| HyperPak exhaust manifolds https://slantsix.org/forum/viewtopic.php?t=63304 |
Page 1 of 4 |
| Author: | Michael Sargeant [ Wed Feb 13, 2019 5:49 pm ] |
| Post subject: | HyperPak exhaust manifolds |
Does any one have knowledge of how many sets of HyperPak exhaust manifolds the factory produced ? |
|
| Author: | hyper_pak [ Wed Feb 13, 2019 6:08 pm ] |
| Post subject: | Re: HyperPak exhaust manifolds |
Mike, I don't know if anyone would know the answer. I know the history of my parts. Bought new in 1961, went on a Lancer and raced from day one. Second owner used them on a Studebaker circle track car in the mid 60's. Second owner sold them to me in 1972. In my experience you will find about 5 to 10 intakes to every set of exhaust manifolds you find. You could buy the items without buying the kit. I have thought about doing a registry of parts just out of interest, but not sure what it would prove. You will never find all them, they are hid away in corners all over the world. I only know about 4 sets, but I don't know much. Maybe owners on SS.Org will respond. |
|
| Author: | Michael Sargeant [ Wed Feb 13, 2019 6:24 pm ] |
| Post subject: | Re: HyperPak exhaust manifolds |
Thank you for the reply. I have a set and have been exploring reproducing them for a couple of years now. I'm just trying to get a feel for how many the factory may have originally produced. |
|
| Author: | GregCon [ Thu Feb 14, 2019 8:07 am ] |
| Post subject: | Re: HyperPak exhaust manifolds |
What surprises me is no one (I think) has produced a good stainless steel 'shorty' type header for the Slant Six. Something like what Mopar would put on the engine if it were produced today. |
|
| Author: | slantzilla [ Thu Feb 14, 2019 8:31 am ] |
| Post subject: | Re: HyperPak exhaust manifolds |
IIRC, there were roughly 200 HPak kits made available for sale. I have an old article on my computer at home, I'll post it when I get home. |
|
| Author: | hyper_pak [ Thu Feb 14, 2019 5:34 pm ] |
| Post subject: | Re: HyperPak exhaust manifolds |
I would really like to see that! I have heard stories about dealers throwing them in the dumpsters after they set on shelves for years. |
|
| Author: | hyper_pak [ Thu Feb 14, 2019 5:41 pm ] |
| Post subject: | Re: HyperPak exhaust manifolds |
So I just did the math, the complete kit was 403.30. I chose 1961 and adjusted for inflation that is $ 3,395.17. It doesn't take much thought to figure not many people would fork out that much cash back in he day. |
|
| Author: | slantzilla [ Thu Feb 14, 2019 6:09 pm ] |
| Post subject: | Re: HyperPak exhaust manifolds |
|
|
|
| Author: | slantzilla [ Thu Feb 14, 2019 6:11 pm ] |
| Post subject: | Re: HyperPak exhaust manifolds |
  Not sure where I found this posted before, but I found it in an old folder in my Downloads yesterday while cleaning out old memes. 
|
|
| Author: | Dart270 [ Fri Feb 15, 2019 2:17 am ] |
| Post subject: | Re: HyperPak exhaust manifolds |
Cool, thanks for posting! Lou |
|
| Author: | Greg Ondayko [ Fri Feb 15, 2019 5:49 am ] |
| Post subject: | Re: HyperPak exhaust manifolds |
Yes! THe Dont sell the Hyper-pack to anybody Sub section are wise words. My 69 Dart is just that. Idles between 500-1800 RPM - THe hotter it gets the better - below 60°F fuggadabout it. It would have to be driven with 3 feet.  Thanks for posting Dennis! Greg |
|
| Author: | Greg Ondayko [ Fri Feb 15, 2019 5:51 am ] |
| Post subject: | Re: HyperPak exhaust manifolds |
Quote: So I just did the math, the complete kit was 403.30. I chose 1961 and adjusted for inflation that is $ 3,395.17. It doesn't take much thought to figure not many people would fork out that much cash back in he day.
Comparable to a well engineered Turbo Upgrade today - People sure buy those! Greg |
|
| Author: | drgonzo [ Fri Feb 15, 2019 7:04 am ] |
| Post subject: | Re: HyperPak exhaust manifolds |
Thanks for posting that Zilla. Greg what cam are you using with your Hyper-pack set up and would it still be your choice if you were doing that engine over? Thanks, Brad |
|
| Author: | Greg Ondayko [ Fri Feb 15, 2019 8:54 am ] |
| Post subject: | Re: HyperPak exhaust manifolds |
Quote: Thanks for posting that Zilla. Greg what cam are you using with your Hyper-pack set up and would it still be your choice if you were doing that engine over?
Thanks, Brad Yes I dont care about the idle.. if i waned good idle i woukd go efi or different cam. Cam is old mopar performance .528" lift. Not sure of duration. I use 1.6 roller rockers for a .562 total lift. Also Some Info Here: http://www.slantsix.org/forum/viewtopic.php?f=6&t=13007 Greg |
|
| Author: | drgonzo [ Fri Feb 15, 2019 10:13 am ] |
| Post subject: | Re: HyperPak exhaust manifolds |
Thanks Greg. |
|
| Page 1 of 4 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|