Slant Six Forum https://slantsix.org/forum/ |
|
oil pans https://slantsix.org/forum/viewtopic.php?t=64193 |
Page 1 of 1 |
Author: | joeh [ Mon Nov 04, 2019 4:15 pm ] |
Post subject: | oil pans |
Is there a rear slump oil pan made for a slant 6? |
Author: | Charrlie_S [ Mon Nov 04, 2019 4:18 pm ] |
Post subject: | Re: oil pans |
Yes. Trucks |
Author: | GTS225 [ Mon Nov 04, 2019 4:39 pm ] |
Post subject: | Re: oil pans |
But don't get just the pan. Snag the pickup tube and dipstick, too. Roger |
Author: | joeh [ Mon Nov 04, 2019 4:55 pm ] |
Post subject: | Re: oil pans |
My 69 truck has a front slump what years would have a rear? |
Author: | Joshie225 [ Mon Nov 04, 2019 5:30 pm ] |
Post subject: | Re: oil pans |
Quote: My 69 truck has a front slump what years would have a rear?
All the '72-'86 trucks. '71-'87 B vans. The pickup tube is still available new, but the rest is not.
|
Author: | GTS225 [ Tue Nov 05, 2019 4:39 am ] |
Post subject: | Re: oil pans |
Quote: All the '72-'86 trucks. '71-'87 B vans. The pickup tube is still available new, but the rest is not.
*************************************************Oh, yeah, forgot about that. '69 was still using the "straight" axle. Mopar changed over to independent front (on trucks) with the '72 model year. Roger |
Author: | afastcuda1970 [ Sun Nov 10, 2019 1:03 pm ] |
Post subject: | Re: oil pans |
The dipstick tube goes directly into the pan on the rear sump pans and has plug in the block where the tube normally goes. Get the plug also. |
Page 1 of 1 | All times are UTC-08:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |