| Slant Six Forum https://slantsix.org/forum/ |
|
| 1964 Dodge Dart 270 four door https://slantsix.org/forum/viewtopic.php?t=64397 |
Page 1 of 1 |
| Author: | 64DartGT [ Fri Jan 10, 2020 11:37 am ] |
| Post subject: | 1964 Dodge Dart 270 four door |
Does anyone have a picture of the side molding trim clips for a 1964 four door Dart? Its the molding that runs down the sides of the car door, fender, and quarter panel? Thanks Steven |
|
| Author: | Dart270 [ Fri Jan 10, 2020 11:48 am ] |
| Post subject: | Re: 1964 Dodge Dart 270 four door |
You mean the all stainless trim that is about 1" wide and just below the fender lip line (see pic of my car)? https://flickr.com/photos/16910097@N06/ ... 013976355/ There might be another version that is in the middle of the panels and thinner profile? For most places along the car you can use universal spring loaded metal clips that have a stud and nut. Not sure you can get the plastic ones. I reused many of mine on my car. Lou |
|
| Author: | 64DartGT [ Fri Jan 10, 2020 2:53 pm ] |
| Post subject: | Re: 1964 Dodge Dart 270 four door |
That’s the stainless it’s from front to back like yours above the wheels your car looks nice! |
|
| Author: | 64DartGT [ Fri Jan 10, 2020 3:26 pm ] |
| Post subject: | Re: 1964 Dodge Dart 270 four door |
https://rover.ebay.com/rover/0/0/0?mpre ... 0543338328 Like these? |
|
| Author: | 64DartGT [ Fri Jan 10, 2020 5:23 pm ] |
| Post subject: | Re: 1964 Dodge Dart 270 four door |
https://www.flickr.com/photos/186406306 ... ed-public/ |
|
| Author: | Dart270 [ Sat Jan 11, 2020 2:05 am ] |
| Post subject: | Re: 1964 Dodge Dart 270 four door |
Yes, those type. Some places along the body you may not be able to get to the back side to tighten the nuts. I think the size is 1 1/4" or maybe 1". Probably either will work. Nice Dart! Are you trying to add the trim to a car that had it deleted, or?? Personally, I would leave it alone if it looks straight now. The wheels are 16X8 SSR Integral (late 90s Mustang type/offset) with some spacers and BBP and long studs. I bought the wheels in 2003 and still use 'em. I have 17s for the car too that also look nice. Bought the car w/blown engine and trans in 1996 and resto-modded it 1996-1998. Have driven it all over the US and some of Canada, including on many racetracks of different flavors. Hit an antelope in WY 2 summers ago, so still rebuilding the front clip. Spent 3 days in little Rawlins, WY fixing the engine front pieces and then drove 1800 miles back to VA. Came from Seattle on that trip. Love driving that car. Lou |
|
| Author: | OGLeanDart270 [ Sat Jan 11, 2020 8:32 am ] |
| Post subject: | Re: 1964 Dodge Dart 270 four door |
Both nice looking Darts! I love my four door. Looks like I got your cars twin, looks like only difference is mine has bumper guards. |
|
| Author: | 64DartGT [ Sat Jan 11, 2020 1:06 pm ] |
| Post subject: | Re: 1964 Dodge Dart 270 four door |
Just putting the trim that was on it back it was taken off to paint the car, thanks it’s a fun car! |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|