I’m yer huckleberry... I’m always yer huckleberry...
Trannies (shut up Cookie) and oil pan/harness.
Any of you need anything other than what I’m already bringing for Lou?
| Slant Six Forum https://slantsix.org/forum/ |
|
| Free parts delivered to Barber Lemons Race https://slantsix.org/forum/viewtopic.php?t=64419 |
Page 1 of 2 |
| Author: | drgonzo [ Sat Jan 18, 2020 9:03 am ] |
| Post subject: | Free parts delivered to Barber Lemons Race |
I have: PB 904 with converter, driveshaft, shifter and cables 727 with converter for Slant Complete 7.25 rear axle assembly Front and rear bench seats from '63 Dart (blue) Stock 904 converter |
|
| Author: | Dart270 [ Sat Jan 18, 2020 9:35 am ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
Thanks for posting, DrG. I have a small box of engine parts and odds and ends (pulleys, damper, old race seatbelt/harness, etc) I'll bring too - free. Also have a 67-up A-body oilpan - free. I have too many of those... Hope that's OK I piggyback on your post, since we are going to the same place. I can easily delete it, just say the word. Location is Leeds, Alabama, just east of Birmingham - "Barber Motorsports Park". Dates are Sat+Sun Feb 1-2. Lou |
|
| Author: | drgonzo [ Sat Jan 18, 2020 10:05 am ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
Good post, no need to delete. |
|
| Author: | Rob Simmons [ Sun Jan 19, 2020 7:43 am ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
I’m yer huckleberry... I’m always yer huckleberry... Trannies (shut up Cookie) and oil pan/harness. Any of you need anything other than what I’m already bringing for Lou? |
|
| Author: | drgonzo [ Sun Jan 19, 2020 8:20 am ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
OK, both trannies, converters and driveshaft? |
|
| Author: | Dart270 [ Sun Jan 19, 2020 10:51 am ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
Note that harness schtuff is dated 2007... Will bring another pan for ya! Lou |
|
| Author: | Rob Simmons [ Sun Jan 19, 2020 12:33 pm ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
Yes Sir, all them goodies what go with it. I’ve been wanting a PB fer another silly project in my head. Date code on the harness isn’t as big a deal for what it’s potentially going in Lou. I will dig out all my oil pans in search of the F body ones you want, Lou. I’ll bring pick up tubes, but not sure which ones go with what. I do have a Super Six engine out of a Volare I might be able to pull the pan and tube off of. |
|
| Author: | Dart270 [ Sun Jan 19, 2020 2:38 pm ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
Sounds great on the pan(s). If you have 2 F-body pans, I will gladly pay you for the 2nd, but one will be great. I do not need pickups. AFAIK, the pickup is same as 67-up A-body pan, and that is what I have used. I'll bring a late A-body pan for ya. Lost count of how many I have... Lou |
|
| Author: | Rob Simmons [ Sun Jan 19, 2020 3:50 pm ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
Sounds good. I’ll round up as many 369 pans as I can find. Is that the only one that will work for you? I have other mid sump pans. |
|
| Author: | Dart270 [ Mon Jan 20, 2020 2:43 am ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
That is my favorite, but I can make others work. 2 X F-body pans would be very nice. Lou |
|
| Author: | Greg Ondayko [ Mon Jan 20, 2020 8:27 am ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
I hope free parts delivery service is available when you and flyin' brian' come to pittsburgh this summer!.. Nudge nudge.... wink... wink. Greg |
|
| Author: | Dart270 [ Tue Jan 21, 2020 2:57 am ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
Sure, what are you after, Mr. GO car? Lou |
|
| Author: | Greg Ondayko [ Sun Jan 26, 2020 6:08 pm ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
Nuthin in particular.. maybe after I break something.. or maybe That cool jeffery intake to TRY... NOT BUY on Ruster if Ruster runs this year.. Greg |
|
| Author: | Dart270 [ Mon Jan 27, 2020 4:30 am ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
Parts delivery to Pitt, yep... I would be happy for you to try the Jeffrey intake. It is sitting at eye level in my shop, and I've been contemplating trying it on Project V myself, but I will probably wait a while. Lou |
|
| Author: | Rob Simmons [ Mon Jan 27, 2020 6:18 am ] |
| Post subject: | Re: Free parts delivered to Barber Lemons Race |
Quote: Parts delivery to Pitt, yep... I would be happy for you to try the Jeffrey intake. It is sitting at eye level in my shop, and I've been contemplating trying it on Project V myself, but I will probably wait a while.
Something Mike made, or one he tweaked...? Details Man! Details! Lou I dug out a couple center sump oil pans and a pair of those Mapes wheels to throw in the truck Thursday when we GO TO RACE!! 
|
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|