Slant Six Forum
https://slantsix.org/forum/

'66 Valiant, 1 or 2 piece strut rod bushings?
https://slantsix.org/forum/viewtopic.php?t=6470
Page 1 of 1

Author:  Slant Cecil [ Wed Aug 06, 2003 6:46 pm ]
Post subject:  '66 Valiant, 1 or 2 piece strut rod bushings?

I was going to replace just the front half of my strut rod bushings to get rid of some of the extra play. The replacements from NAPA was a one piece bushing? It is smaller on one end than the other, is it supposed to replace both halves and install from the front so the LCA doesn't have to be removed? Or did I get a wrong part? Has anyone seen this type of bushing?

Cecil

Author:  Dennis Weaver [ Wed Aug 06, 2003 8:30 pm ]
Post subject: 

...go back and see if they can get you the two-piece, it's a better setup. MOOG comes to mind. I don't know what NAPA sells, but it may be the same stuff. Anybody know a part #?

'I hear you' on just replacing the front half :) It's very simple, and that's usually the half that gets shot. Done that myself to hold me over until I felt like yanking everything apart (which would be never, if I could help it). Check your lower control arm bushings, though. If there's been a lot of slop in the strut rods for long, it may be shucking out the LCA bushings, too.

"DW"

Author:  Dart270 [ Wed Aug 06, 2003 8:48 pm ]
Post subject: 

The MOOG two piece bushings are very nice - metal inserts and big beefy rubber. I've never seen a one piece one that I thought was worth anything, since they have all been 100% rubber.

Lou

Author:  Matt Cramer [ Mon Aug 11, 2003 7:49 pm ]
Post subject:  stock

While the original bushings are a 1 piece design, I don't have any regrets about using 2 piece poly ones from Energy Suspension on my Dart.

Author:  bud L. [ Wed Aug 13, 2003 10:11 pm ]
Post subject:  ?

It used to be the moog ones with the steel inserts were called 'hi perf' or something like that. the std ones were not nearly as well designed.

Author:  killin5 [ Thu Aug 14, 2003 1:28 pm ]
Post subject: 

Cecil,

The Moog Part number for the strut rod bushing is K-7068.

They are $24.67 at Central Auto parts.

John

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/