| Slant Six Forum https://slantsix.org/forum/ |
|
| Oregon Cam Grinders https://slantsix.org/forum/viewtopic.php?t=65857 |
Page 1 of 1 |
| Author: | frank79912 [ Sat Mar 20, 2021 7:10 am ] |
| Post subject: | Oregon Cam Grinders |
What's going on with Ken and OCG ? Their website is shut down or is it just my search engine . |
|
| Author: | hyper_pak [ Sat Mar 20, 2021 7:33 am ] |
| Post subject: | Re: Oregon Cam Grinders |
I got to their page using Firefox. |
|
| Author: | volaredon [ Sat Mar 20, 2021 7:51 am ] |
| Post subject: | Re: Oregon Cam Grinders |
I've gotten right to their site several times recently but haven't tried in about a week. |
|
| Author: | Joshie225 [ Sat Mar 20, 2021 10:18 am ] |
| Post subject: | Re: Oregon Cam Grinders |
This works for me: http://www.oregoncamshaft.com/ |
|
| Author: | Dart270 [ Sat Mar 20, 2021 1:35 pm ] |
| Post subject: | Re: Oregon Cam Grinders |
Whew, I hope Ken is still in business. Maybe I will order some new regrinds to keep in stock in case he goes away... Lou |
|
| Author: | volaredon [ Sat Mar 20, 2021 3:27 pm ] |
| Post subject: | Re: Oregon Cam Grinders |
I'm sure he is, there was no talk of him going away when I have talked to him in the past couple of weeks. In fact, when we were talking about the /6 cam he just did for me, I told him about a 318 that I want to improve on in another car/// and he said "Send it on in". |
|
| Author: | StrokerScamp [ Sun Mar 21, 2021 10:06 pm ] |
| Post subject: | Re: Oregon Cam Grinders |
It's not worked for me for a couple of weeks. Many other people in other parts of the country are also experiencing it. I called Ken and everything is fine. He sent me their master cam grind list so that I would have it for future reference since I cannot access the site. They also have added lots of new grinds that were not on the site. |
|
| Author: | emsvitil [ Sun Mar 21, 2021 10:58 pm ] |
| Post subject: | Re: Oregon Cam Grinders |
What browsers are working and what browsers aren't? |
|
| Author: | halfafish [ Mon Mar 22, 2021 5:52 pm ] |
| Post subject: | Re: Oregon Cam Grinders |
This business came up on FABO recently too. I've been on the website several times in the last two weeks with no issues. I was just there to pick up the cam for my truck, and they were busy as all get-out. I wouldn't worry about them closing the doors. |
|
| Author: | frank79912 [ Thu Mar 25, 2021 1:57 pm ] |
| Post subject: | Re: Oregon Cam Grinders |
Must be the BS server I have. |
|
| Author: | Joshie225 [ Thu Mar 25, 2021 7:36 pm ] |
| Post subject: | Re: Oregon Cam Grinders |
Quote: Must be the BS server I have.
You may have overly aggressive anti-malware or firewall software.
|
|
| Author: | MadScientistMatt [ Fri Mar 26, 2021 7:57 am ] |
| Post subject: | Re: Oregon Cam Grinders |
Quote: What browsers are working and what browsers aren't?
Working for me today on Google Chrome.
|
|
| Author: | drgonzo [ Fri Mar 26, 2021 6:25 pm ] |
| Post subject: | Re: Oregon Cam Grinders |
Just worked for me on Chrome as well. |
|
| Author: | frank79912 [ Wed Mar 31, 2021 3:48 pm ] |
| Post subject: | Re: Oregon Cam Grinders |
I called OCG today to talk to Ken ,evidently I am not the only one having problems bring up the web site. He said a few other guys from back east have told him the same thing. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|