Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Oct 04, 2024 2:22 pm

All times are UTC-07:00




Post new topic  Reply to topic  [ 35 posts ]  Go to page 1 2 3 Next
Author Message
PostPosted: Thu Sep 16, 2021 8:59 pm 
Offline
2 BBL ''SuperSix''

Joined: Wed Jan 13, 2021 2:37 pm
Posts: 16
Car Model: 71 dart
Curious how big of valves I can add to my head without cutting into the cylinders to make them work.


Top
   
PostPosted: Thu Sep 16, 2021 9:12 pm 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
The stock bore size will accept a 1.75" intake valve, but it usually doesn't flow any better than a 1.72" Chevy valve. A 1.45" exhaust valve will work most of the time.

_________________
Joshua


Top
   
PostPosted: Fri Sep 17, 2021 6:16 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16765
Location: Blacksburg, VA
Car Model:
How much overbore can you do, or do you want/dare to do? 0.100" over is fine on almost all pre-80 or so Slant blocks.

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
PostPosted: Sat Sep 18, 2021 8:47 am 
Offline
SL6 Racer

Joined: Sun Nov 10, 2002 8:49 pm
Posts: 117
Location: Longview Washington
Car Model:
Several of my race engines with a 3.500 bore use a 1.780 intake and a 1.500 exhaust


Top
   
PostPosted: Sun Sep 19, 2021 1:57 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16765
Location: Blacksburg, VA
Car Model:
There you have it, folks. Hi Dave!

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
PostPosted: Sun Sep 19, 2021 1:03 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14425
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
IIRC, the biggest valves Mike used in my heads were 1.73/1.50. Mine were done for a +.045" overbore.

_________________
Official Cookie and Mater Tormentor.


Top
   
PostPosted: Sun Sep 19, 2021 2:28 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 9421
Location: IRWIN PA
Car Model:
If you do a small or no overbore the tops of the cylinders can be clearance for large valves as well.


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Sun Sep 19, 2021 8:16 pm 
Offline
2 BBL ''SuperSix''

Joined: Wed Jan 13, 2021 2:37 pm
Posts: 16
Car Model: 71 dart
The reason I'm wondering about how big you can go without boring or machine work is I've found a few programs for designing cylinder heads and at some point in the future (not exactly sure of when at this point) I'd like to make a prototype for and aluminum head and I'd like it to be a bolt on upgrade that requires no machining.


Top
   
PostPosted: Mon Sep 20, 2021 4:58 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8656
Location: Silver Springs, Fl.
Car Model:
For a newly designed head the numbers you asked for are irrelevent, unless the valves are in the stock location. If you design the head, lets say for canted valves, the size could be different. My opinion, a "bolt on" head, would basically be just a stock head in aluminum, and a waist of time and money. If spending the effort, for a alloy head, it should be an improvement over the stock head, in terms of flow.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
PostPosted: Mon Sep 20, 2021 9:08 am 
Offline
2 BBL ''SuperSix''

Joined: Wed Jan 13, 2021 2:37 pm
Posts: 16
Car Model: 71 dart
I was thinking more of a four valve hemispherical head derived from one of the 3.5 heads as a starting point.


Top
   
PostPosted: Mon Sep 20, 2021 9:22 am 
Offline
Turbo Slant 6
User avatar

Joined: Sat Sep 13, 2014 8:25 am
Posts: 797
Location: Springtucky OR
Car Model:
It's going to be difficult to make a 4-valve head work without it being a crossflow. But a crossflow head is definitely not going to be a 'bolt on' replacement.
Rocker arms for a 4-valve slant 6 head would be interesting...

_________________
--> Check out my FI Turbo build <--
--> And the race truck build project <--
--> The Diesel Corvette <--
Image


Top
   
PostPosted: Mon Sep 20, 2021 9:45 am 
Offline
2 BBL ''SuperSix''

Joined: Wed Jan 13, 2021 2:37 pm
Posts: 16
Car Model: 71 dart
I think the direction I'm going to go is to laser scan a few heads into a CAD program to see if I can basically morph the two heads together and still keep the intake and exhaust on the same side. Unfortunately this means destroying a few heads because they'll need to be cut up to scan the internals. If the four valve design ends up not being a feasible option I'll just default to a two valve.


Top
   
PostPosted: Tue Sep 21, 2021 5:35 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16765
Location: Blacksburg, VA
Car Model:
A few have moved the int valve over toward the exh valve and then used a 1.80+ int and 1.40 or so exh. This will help. Really, the valve sizes are not that small compared to the displacement of the cylinder. A few people have reached 220+ CFM on intake, which is about like having a 300 CFM int on a 360 V8 engine (need to re-run #'s to be more exact). That is with stock ports and valve location. There is plenty to gain w/o changing port locations or even going to 4 valves/cyl.

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
PostPosted: Tue Sep 21, 2021 12:01 pm 
Offline
Board Sponsor
User avatar

Joined: Sat Nov 02, 2002 7:52 pm
Posts: 1490
Location: San Antonio, Texas
Car Model: 1964 Valiant
Quote:
A few have moved the int valve over toward the exh valve and then used a 1.80+ int and 1.40 or so exh. This will help. Really, the valve sizes are not that small compared to the displacement of the cylinder. A few people have reached 220+ CFM on intake, which is about like having a 300 CFM int on a 360 V8 engine (need to re-run #'s to be more exact). That is with stock ports and valve location. There is plenty to gain w/o changing port locations or even going to 4 valves/cyl.

Lou
The Volvo B20 slant four has raised intake ports. A simple head with raised intake ports could have a decent flow. The B20 has a 3.50" bore, was last used in 1968. This one had fuel injection. Other than the location of the raised ports I wouldn't recommend copying the entire head. Might cause clearance problems on cars, but would be okay with Sweptlines. Its not a cool design, but it might work with minimal other changes. With quench pads and some other revisions would work best on the zero deck 170. Maybe the valves could be canted a little, but look for existing valve hardware before you consider that.

https://photos.app.goo.gl/ChZrX82iz2jpfyh98


Top
   
PostPosted: Wed Sep 22, 2021 4:41 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 9421
Location: IRWIN PA
Car Model:
Quote:
A few have moved the int valve over toward the exh valve and then used a 1.80+ int and 1.40 or so exh. This will help. Really, the valve sizes are not that small compared to the displacement of the cylinder. A few people have reached 220+ CFM on intake, which is about like having a 300 CFM int on a 360 V8 engine (need to re-run #'s to be more exact). That is with stock ports and valve location. There is plenty to gain w/o changing port locations or even going to 4 valves/cyl.

Lou


Is this accomplished by re drilling / boring the intake Guide /stem Center line further over toward the exhaust valve? I had never heard of this before - Intriguing, as I am sure you need a skookum machinist to re layout the seats and guides.

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 35 posts ]  Go to page 1 2 3 Next

All times are UTC-07:00


Who is online

Users browsing this forum: Bing [Bot] and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited