Slant Six Forum
https://slantsix.org/forum/

Correct Dash Button And knob color -1962 Valiant
https://slantsix.org/forum/viewtopic.php?t=67364		 Page 1 of 1
Author:  Greg Ondayko [ Sun Aug 06, 2023 4:44 am ]
Post subject:  Correct Dash Button And knob color -1962 Valiant
Hello Sages,

I am looking to restore my '62 Wagon Dash binnacle and gauge bezel.

The heater/ defrost controls as well as the wiper knob and headlight knob is what I am trying to find out about. They are a pale yellow plastic... looking like the color of old teeth.

What is the correct color/ finish for these?
The'62 valiant brochure shows black... but I have never seen any evidence of black on my 3 examples.


Thank you for any help!

Greg
Author:  SlantSixDan [ Mon Aug 07, 2023 3:33 pm ]
Post subject:  Re: Correct Dash Button And knob color -1962 Valiant
They're meant to be ivory (pale yellowish-white). The buttons and knobs in the '62 Lancer were made on the same moulds, but were black. The brochure pic got that wrong, probably on account of pre-production prototypes.
Author:  Greg Ondayko [ Mon Aug 07, 2023 4:24 pm ]
Post subject:  Re: Correct Dash Button And knob color -1962 Valiant
Thanks Uncle Dan!
That's what I have... the ivory ones.

I thought there might be some pre production confusion..

I also had considered that they were supposed to be chromed plastic.. like on the malise era cars and that possibly all of the chrome on the tactile surfaces eroded away. Most of the chromed plastic on the gauge bezels is gone and no one ever is supposed to touch those.

In my opinion the black or chrome knobs would look much more dapper than the correct Ivory plastic.

But I will stive for correctness not good looks with this one :D
Greg
Author:  SlantSixDan [ Tue Aug 08, 2023 12:38 pm ]
Post subject:  Re: Correct Dash Button And knob color -1962 Valiant
I would not want chrome—too much eye-zapping glare when the sun hits from behind or from the side. That's a problem with the upper chrome part of the '62 Lancer instrument panel faceplate too, and a big problem with the all-chrome '60-'61 Valiant bezel. The '62 Valiant bezel is better on that front; it's mostly all black except for the chrome rings around the gauges. However, the gauges themselves are brushed aluminum, so they're glare-y, too. Here again, same gauges used in the Lancer, except they're black with white lettering rather than brushed aluminum with black lettering. So I think if I were putting together the most legible, least glaring IP for one of these cars, it'd be Lancer gauges with a Valiant faceplate.

I'm not super keen on the ivory buttons and knobs, but I don't hate them enough that I'd want to change them, and I think the black Lancer items would be too much black all in one place.
Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/