Slant Six Forum
https://slantsix.org/forum/

Bolt size for the cast alternator bracket.
https://slantsix.org/forum/viewtopic.php?t=67725		 Page 1 of 1
Author:  bwhitejr [ Tue Apr 16, 2024 7:48 am ]
Post subject:  Bolt size for the cast alternator bracket.
Hi All,
What is the bolt size for the cast alternator bracket that bolts the bracket to the top engine? I have the two nuts, but can't find the bolt that goes in the hole at the top. I think it is a fine thread. It would help if I know what it looks like.

Thanks in advance

-bw-
Author:  Greg Ondayko [ Tue Apr 16, 2024 8:23 am ]
Post subject:  Re: Bolt size for the cast alternator bracket.
Quote:
Hi All,
What is the bolt size for the cast alternator bracket that bolts the bracket to the top engine? I have the two nuts, but can't find the bolt that goes in the hole at the top. I think it is a fine thread. It would help if I know what it looks like.

Thanks in advance

-bw-

I just installed this on Sunday.

3/8"-16 UNC for the 2 front bolts / Head / Block (use thread sealer on the bottom one as it threads into oil.)

and 5/16"-18 UNC for the rearmost bolt - no sealer needed.

Greg
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/