Last I knew Dr. Diff had them.listed as well as Mancini.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Shock Spring Mounting Plates Needed 8 3/4 https://slantsix.org/forum/viewtopic.php?t=68130 |
Page 1 of 1 |
| Author: | hyper_pak [ Fri Mar 21, 2025 3:36 pm ] |
| Post subject: | Shock Spring Mounting Plates Needed 8 3/4 |
I understand 8 1/4 to Dana 60 will fit. I will take the U Bolts also if you have them in good shape. I have a set of 7 1/4 if that means anything to anyone. |
|
| Author: | slantzilla [ Sat Mar 22, 2025 7:05 pm ] |
| Post subject: | Re: Shock Spring Mounting Plates Needed 8 3/4 |
Last I knew Dr. Diff had them.listed as well as Mancini.
|
|
| Author: | Greg Ondayko [ Sun Mar 23, 2025 6:05 am ] |
| Post subject: | Re: Shock Spring Mounting Plates Needed 8 3/4 |
I have found Some Real nice ones on eBay that last time I bought some. Yes Mancini Racing Have them but the do not look stock, Firm feel and others may have them too! About $100 a pair Fully detailed, and then I used RockAuto or a local spring Shop for the 3" U Bolts. |
|
| Author: | hyper_pak [ Sun Mar 23, 2025 12:08 pm ] |
| Post subject: | FOUND Shock Spring Mounting Plates Needed 8 3/4 |
Don't have time to hunt through 9 million items on ebay much anymore. I found a set. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|