| Slant Six Forum https://slantsix.org/forum/ |
|
| Help-Diagram of wiper linkage needed! https://slantsix.org/forum/viewtopic.php?t=6825 |
Page 1 of 1 |
| Author: | drwheelie [ Sat Sep 06, 2003 12:36 pm ] |
| Post subject: | Help-Diagram of wiper linkage needed! |
Hi I am in the middle of replacing the bushings on the wiper linkage for my 76 volare. This is not a fun job on this car due to the tight clearance in the cowling. I have all the parts out now but have no way to double check to make sure that the way I am planning on reassembling is correct. I was unable to diagram the whole thing as I took it apart because the bar connecting the driven pivot (L side) to the non driven (r side) fell off a few months ago. It has been sitting in my shop and I forgot how it goes on. I am pretty mechanically inclined and think I have it all laid out right but I wanted to double check. I have the factory 76 service manual and a chiltons manual. The chiltons doesnt have a diagram of the entire mechanisim and I just found out the diagram for this assy. is found in the factory electrical suppliment to the main manual. I dont have this book. Any nice lister out there feel generous enough to scan the correct page for me or otherwise provide me with some tips to make sure I have oriented the linkage components correctly. Many thanks in advance Dr Wheelie |
|
| Author: | moturbopar [ Sat Sep 06, 2003 12:39 pm ] |
| Post subject: | |
Sorry I dont have any answers for you, but I do have a question. I need to do some work on my wiper system too. But cant find the bushings. Whare did you get them? Thanks |
|
| Author: | drwheelie [ Sat Sep 06, 2003 12:52 pm ] |
| Post subject: | |
In the help! parts rack at pep boys. I have also heard that the dealer has them. I think Belkin makes them too, they supply lots of parts stores. Apparently these little buggers were used for many years on several different body styles so there is a need to keep makin em. I have to say that this wiper system really stinks. The action on mine is very clunky and they seem hard to work on. -DW |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|