| Slant Six Forum https://slantsix.org/forum/ |
|
| Pat Blais https://slantsix.org/forum/viewtopic.php?t=68250 |
Page 1 of 1 |
| Author: | Eatkinson [ Tue Jun 10, 2025 4:13 pm ] |
| Post subject: | Pat Blais |
Anyone have a good, recent email/phone for Pat Blais? I contacted him through eBay, but it's tough to exchange direct contact info through there as they'll block your message from sending. The phone number I tried is disconnected. Thanks, in advance. |
|
| Author: | SlantSixDan [ Tue Jun 10, 2025 6:59 pm ] |
| Post subject: | Re: Pat Blais |
Only phone number I have is (206) 365-1966. Email tflitepatty@verizon.net |
|
| Author: | Eatkinson [ Tue Jun 10, 2025 11:02 pm ] |
| Post subject: | Re: Pat Blais |
Thanks. Those were both defunct, but managed to connect with him at tflitepatty@comcast.net. |
|
| Author: | hyper_pak [ Wed Jun 11, 2025 7:59 am ] |
| Post subject: | Re: Pat Blais |
Glad you were able to contact him! How is he doing? |
|
| Author: | Eatkinson [ Thu Jun 12, 2025 2:12 pm ] |
| Post subject: | Re: Pat Blais |
He responded promptly once to my inquiry, so that felt helpful...for a second. Unfortunately, he suggested a solution to a problem I don't have, so I had to provide him more details. Hasn't responded to that yet...so I guess we'll see. |
|
| Author: | bossanova5 [ Thu Jul 24, 2025 5:48 pm ] |
| Post subject: | Re: Pat Blais |
Pat's great. He helped with a rebuild both a few months ago and 20 years ago. You won't find anyone who knows more about Torqflites than Pat. He sometimes takes a week or so to get back to you. I usually would send him another email to remind him after about a week. I don't know of anybody today that will send you the parts first without payment on good faith that you will pay him when you receive them. He has done that for me repeatedly. |
|
| Author: | volaredon [ Fri Jul 25, 2025 6:02 am ] |
| Post subject: | Re: Pat Blais |
I thought this guy was "PATC transmission" which I guess is no more. I guess not. I just sent him an email about getting me the pressure switches needed to put an a500 in place of a 3 speed auto that PATC used to offer. Hopefully he gets back to me |
|
| Author: | volaredon [ Thu Jul 31, 2025 5:42 pm ] |
| Post subject: | Re: Pat Blais |
No answer from Pat yet |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|