Slim chance I know, but any leads on either cam?
I know, I know, why?
| Attachments: |
|
Display Engine (2) s.JPG [ 36.38 KiB | Viewed 1202 times ] |
| Slant Six Forum https://slantsix.org/forum/ |
|
| I am looking for an original Hyper Pack cam or a Melling RPD-3 Cam https://slantsix.org/forum/viewtopic.php?t=68521 |
Page 1 of 1 |
| Author: | hyper_pak [ Fri Jan 30, 2026 2:57 pm ] | ||
| Post subject: | I am looking for an original Hyper Pack cam or a Melling RPD-3 Cam | ||
Slim chance I know, but any leads on either cam? I know, I know, why?
|
|||
| Author: | Rick Covalt [ Sat Jan 31, 2026 4:52 am ] |
| Post subject: | Re: I am looking for an original Hyper Pack cam or a Melling RPD-3 Cam |
Quote: I know, I know, why?
So,why?  No one will know and there are much better running cams, right.
|
|
| Author: | Greg Ondayko [ Sat Jan 31, 2026 6:14 am ] |
| Post subject: | Re: I am looking for an original Hyper Pack cam or a Melling RPD-3 Cam |
Get the specs and have Ken at Oregon Cam Regrinding regrind it on an OE core. I am not sure if that is an option for you. If I needed that cam, that is what I might try. Do those old Hyperpak cams have part numbers stamped on them? |
|
| Author: | slantzilla [ Sat Jan 31, 2026 6:46 am ] |
| Post subject: | Re: I am looking for an original Hyper Pack cam or a Melling RPD-3 Cam |
Just go to any mower repair shop and grab a cam. Same thing. 
|
|
| Author: | Rick Covalt [ Sat Jan 31, 2026 7:38 am ] |
| Post subject: | Re: I am looking for an original Hyper Pack cam or a Melling RPD-3 Cam |
Quote: Just go to any mower repair shop and grab a cam. Same thing.
You crack me up! And I work in a mower shop!
|
|
| Author: | Rick Covalt [ Sat Jan 31, 2026 7:42 am ] |
| Post subject: | Re: I am looking for an original Hyper Pack cam or a Melling RPD-3 Cam |
Here is the part#/ specs from Dan. I'd like to see the @.050 numbers. That also appears to be a lot of overlap?? But looking at other comments it appears that is about the range the hyperpak like. Chrysler Hyper Pak camshaft part № 2205 620: 276° intake duration 268° exhaust duration 52° overlap 0.430" lift |
|
| Author: | hyper_pak [ Sat Jan 31, 2026 8:36 am ] |
| Post subject: | Re: I am looking for an original Hyper Pack cam or a Melling RPD-3 Cam |
All fairly good answers, except the lawn mower cam answer, that is totally wrong. I have never seen one, or the Melling either. Wondering if they exist. Not looking for the easy button, looking for the real deal. |
|
| Author: | SlantSixDan [ Sat Jan 31, 2026 9:07 am ] |
| Post subject: | Re: I am looking for an original Hyper Pack cam or a Melling RPD-3 Cam |
Quote:
I work in a mower shop!
Y'don't say! I bet that's a very different proposition now than back in my day.
|
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|