I recently purchased a 1963 Valiant Signet 200. It came with several boxes of spare parts. Among them are 2 pair of torsion bars. One set is marked 890L and 890R,which cross to 2535890 and 891. These are used,but appear in excellent condition. In addition there is another unmarked set. I do not need these but would like to make them available to someone who can use them. They are somewhat heavy and cumbersome, and I am not interested in shipping them.I am in Western Washington. Not really interested in selling them,but if someone has a front bench seat that fits my valiant, I would be willing to trade for them. Otherwise lrt me know your interest, they need a home. Thanks, Alan

Can you measure the diameter of the unwanted bars:

1. to make sure they are a matched set.
2. to inform any perspective buyyers as to what rate/diameter they are.


Maybe put a post in the parts for sale section of this forum for any parts that you wish to "part" with.


Cheers!


Greg

_________________
http://www.youtube.com/hyperpack

good idea, thanks for that I hadn't thought of that

Yep For sure!

No problem

_________________
http://www.youtube.com/hyperpack

If you have a dial caliper, you might measure the diameters directly. That would avoid having to sleuth the part numbers.

All the best,
Lou

_________________
Home of Slant6-powered fun machines since 1988

Those are .850" bars, so stock 273/318 V-8 bars, or later Slanty w/AC &/or disc brakes.