This is where the exhaust pipe connects to the stock manifold, there are two of them.
I can't find that nut.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Size of nut on exhaust manifold https://slantsix.org/forum/viewtopic.php?t=68563 |
Page 1 of 1 |
| Author: | Wesola78 [ Sun Mar 08, 2026 10:53 am ] |
| Post subject: | Size of nut on exhaust manifold |
This is where the exhaust pipe connects to the stock manifold, there are two of them. I can't find that nut.
|
|
| Author: | Greg Ondayko [ Sun Mar 08, 2026 12:20 pm ] |
| Post subject: | Re: Size of nut on exhaust manifold |
I *think* they are somewat odd at 7/16"-14 NC. I have a manifold at the shop ( for sale) that I can check on later to confirm. |
|
| Author: | Wesola78 [ Sun Mar 08, 2026 9:37 pm ] |
| Post subject: | Re: Size of nut on exhaust manifold |
Thanks Greg. I just thought of this; the exhaust manifold is off of the engine right now, I can take it with me to Ace Hardware in the morning. Ding ding ding! Why did'nt I think of that before??? |
|
| Author: | volaredon [ Mon Mar 09, 2026 3:54 am ] |
| Post subject: | Re: Size of nut on exhaust manifold |
They are 7/16-14 "coarse thread" And if they busted at least you can drill them and nut and bolt them, as they aren't 'blind" holes. The other thing you could do if the threads are intact (unless you're going for exactly assembly line correct, is go to the parts store and get some studs and go that way. |
|
| Author: | Wesola78 [ Mon Mar 09, 2026 11:01 am ] |
| Post subject: | Re: Size of nut on exhaust manifold |
Thanks for the help fellas. I went to Ace Hardware and got 'em, 7/16 - 14. Onward! |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|