I haven't run a pump with a stand pipe in a long time.
The 76 Dart Lite had one and I am wondering about using it on the new pump.
Any opinions?
| Attachments: |
|
Stand Pipe s.JPG [ 34.98 KiB | Viewed 127 times ] |
| Slant Six Forum https://slantsix.org/forum/ |
|
| Stand Pipe, Yes or No? https://slantsix.org/forum/viewtopic.php?t=68665 |
Page 1 of 1 |
| Author: | hyper_pak [ Wed Jun 10, 2026 1:29 pm ] | ||
| Post subject: | Stand Pipe, Yes or No? | ||
I haven't run a pump with a stand pipe in a long time. The 76 Dart Lite had one and I am wondering about using it on the new pump. Any opinions?
|
|||
| Author: | Greg Ondayko [ Wed Jun 10, 2026 1:34 pm ] |
| Post subject: | Re: Stand Pipe, Yes or No? |
Take it off and use an oil filter with the standpipe built in. I belive SlantSixDan knows the part#'s for such things, or you can use the search function. I have done both using a standpipe amd also just running the threaded nub in the base of the oil pump. |
|
| Author: | Rick Covalt [ Thu Jun 11, 2026 5:47 am ] |
| Post subject: | Re: Stand Pipe, Yes or No? |
I would not be afraid to run it in a normal engine. High performance, high rpm then no. It does cause some restriction. 51806 I think is the Wix number? |
|
| Author: | hyper_pak [ Thu Jun 11, 2026 7:57 am ] |
| Post subject: | Re: Stand Pipe, Yes or No? |
I have 1515 Napa filters. |
|
| Author: | Rick Covalt [ Thu Jun 11, 2026 9:46 am ] |
| Post subject: | Re: Stand Pipe, Yes or No? |
Yes that is what I run too. 51806 has the built in standpipe. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|