| Slant Six Forum https://slantsix.org/forum/ |
|
| Torque converter https://slantsix.org/forum/viewtopic.php?t=68791 |
Page 1 of 1 |
| Author: | fkearney334 [ Mon Oct 19, 2026 2:20 pm ] |
| Post subject: | Torque converter |
I have a 77 Dodge Aspen Custom. It is a street car. I upgraded the 225 Super Six with an Offy intake, Holley 465, Hi-fire 7500 ignition, Accel 42,000 volt coil, lightweight 6 blade fan, Aussie Speed valve covers, Comp Cam 440 lift 264 duration cam, Clifford headers, and 2.25 exhaust. The engine was completely rebuilt. It was bored over 30. The head was milled 100. I have a stock 1978 Torqueflite 904 transmission. The 7 1/4 differential was rebuilt with 355 gears. I have 205/65/15 tires. The car weighs 3100 lbs. I need two things for this car. I'm searching for a 36 tooth speedometer gear for a 1978 torqueflite 904 transmission and a torque converter with around a 1700 stall speed. |
|
| Author: | volaredon [ Mon Oct 19, 2026 3:38 pm ] |
| Post subject: | Re: Torque converter |
205 65 15? Seems awful short for that car |
|
| Author: | fkearney334 [ Mon Oct 19, 2026 5:11 pm ] |
| Post subject: | Re: Torque converter |
The car had 15x7 wheels with 205/65/15 tires when I bought it. They are 25 1/2 inches tall. I'm sure they are part of why my factory speedometer shows I'm driving 90 mph, when my GPS speedometer shows 70. I also changed the rear gearing from 294 to 355. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|