| Slant Six Forum https://slantsix.org/forum/ |
|
| what carb would this be? https://slantsix.org/forum/viewtopic.php?t=7261 |
Page 1 of 1 |
| Author: | sailit2000 [ Fri Oct 17, 2003 3:23 am ] |
| Post subject: | what carb would this be? |
!983 Dodge D-150 slant 6 225 CID 2 bbl no vacuum advance on distributor. I know it is a Holly 2 bbl could it be a 2280 ? Does it have have ported and regular vacuum pickups? Thanks. Fran |
|
| Author: | mnecaise [ Fri Oct 17, 2003 5:39 am ] |
| Post subject: | |
According to these drawings, it has venturi and manifold vacuum; but, no ported vacuum... http://www.slantsix.org/articles/choke- ... 0-info.jpg http://www.slantsix.org/articles/choke- ... -info4.jpg BTW, they come from the site here: (thanks to Doug et.al.  )http://www.slantsix.org/articles/choke- ... adjust.htm |
|
| Author: | DusterIdiot [ Fri Oct 17, 2003 10:40 am ] |
| Post subject: | No Vacuum Advance... |
Distributor has no vacuum advance and the carb may not have the correct idle mixture screws, sound like a lean burn carb to me... -D.Idiot |
|
| Author: | mnecaise [ Fri Oct 17, 2003 11:32 am ] |
| Post subject: | |
I can't speak for what's on sailit2000's truck; but, an '83 D-100 would have come from the factory with lean burn (or an EFC with a 62x0 carb if it was a Cali. car). |
|
| Author: | Loghead [ Sat Oct 18, 2003 9:37 am ] |
| Post subject: | R U sure it's a 2bbl ? |
I have a '83 W-150 .It had the leanburn before I tossed it in the trash (where it belongs), and the carb is a 1bbl (Holley 2245) , so unless you've actually removed the carb and know it's a 2bbl.... I used to have a '78 D-100 with a /6 and the 2bbl, but that was a Carter (and it was horrible). |
|
| Author: | DusterIdiot [ Sat Oct 18, 2003 10:56 am ] |
| Post subject: | Whoops... |
Holley 1945 is a one barrel, Holley 2245 is an emissions carb for the 360-2V and 400-2V in 1974+ Road Barges (It replaced the 2210...) .... -D.Idiot |
|
| Author: | Loghead [ Sat Oct 18, 2003 1:13 pm ] |
| Post subject: | |
Ooops!  my bad. I got the last two numbers right. Better sleep with earplugs from now on.... to keep any more of my marbles from rolling out 
|
|
| Author: | DusterIdiot [ Sat Oct 18, 2003 5:46 pm ] |
| Post subject: | That's OK you still get a blue star.... |
 -D.Idiot |
|
| Author: | 83Ram150dudes [ Sun Nov 09, 2003 9:29 pm ] |
| Post subject: | |
If your distributor has no vaccuum advance then it is the ESC/Leanburn system, the stock carb/manifold combo could have been either a 1bbl or 2bbl in 83. Mine came with the 2bbl setup on it, but when I got it there was a Holley 2280 in place of the Carter bbd that should have been there. As far as I can tell it was off of a 318, jetted much too lean for the 225 and it ran very poorly to be nice. The 1bbl that year would have been a Holley 1945(?) carb. Either in stock form work well. From what I understand the 2280 was installed on the slant 6 from the mid 80's to end of production. If you have the Holley 2280 on your slant, I would change it to the Carted BBD instead. Much better carb with more power than the Holley. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|
