We made a set for my Duster. All you need is 2 pieces of 2X2 box about 42" long. We butt-welded them at the front and cut them on an angle at the rear and welded them right on the frame horn. The whole process took about 1/2 hour.
| Slant Six Forum https://slantsix.org/forum/ |
|
| subframe connectors https://slantsix.org/forum/viewtopic.php?t=7385 |
Page 1 of 1 |
| Author: | itsa66dart [ Wed Oct 29, 2003 2:33 pm ] |
| Post subject: | subframe connectors |
I was wondering where I can get a set of weld-in subframe conn. for my 66 dart. I dont want the type that weld into the froorpan. Thanks-Josh |
|
| Author: | slantzilla [ Wed Oct 29, 2003 6:31 pm ] |
| Post subject: | |
We made a set for my Duster. All you need is 2 pieces of 2X2 box about 42" long. We butt-welded them at the front and cut them on an angle at the rear and welded them right on the frame horn. The whole process took about 1/2 hour.
|
|
| Author: | GTS225 [ Thu Oct 30, 2003 7:13 am ] |
| Post subject: | |
There's an article about this very thing over on BigBlockDarts.com, right on the main page. Scroll down a bit, open up suspension, (I think), and read the appropriate listing. Roger |
|
| Author: | itsa66dart [ Thu Oct 30, 2003 7:33 am ] |
| Post subject: | |
OK thanks |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|