Slant Six Forum
https://slantsix.org/forum/

roller rockers
https://slantsix.org/forum/viewtopic.php?t=7470		 Page 1 of 1
Author:  Boostdragon [ Sat Nov 08, 2003 5:55 pm ]
Post subject:  roller rockers
hey y'all, anybody make roller rockers for the slant? me and a freind are planning a couple slant six build-ups, and we're wanting some roller rockers for them.
Author:  slantzilla [ Sun Nov 09, 2003 12:28 pm ]
Post subject: 
The Cox Brothers have them in stock usually. 614/268-9920 :shock:
Author:  Boostdragon [ Sun Nov 09, 2003 8:47 pm ]
Post subject: 
cool, thanks.
Author:  Pierre [ Sun Nov 09, 2003 8:52 pm ]
Post subject: 
I believe Doc has used them on his race engine. Search for using roller rocker or something similar to see his pictures. I know he had to use an oil spray bar to keep them from burning up.
Author:  Boostdragon [ Sun Nov 16, 2003 3:30 pm ]
Post subject: 
why, do they cause oiling problems for the top end?
Author:  slantzilla [ Sun Nov 16, 2003 8:05 pm ]
Post subject: 
Quote:
why, do they cause oiling problems for the top end?
They have been known to not oil the roller tip enough on the street, and that causes stem problems.
Author:  Doctor Dodge [ Sun Nov 16, 2003 8:17 pm ]
Post subject: 
Quote:
Quote:
why, do they cause oiling problems for the top end?
They have been known to not oil the roller tip enough on the street, and that causes stem problems.
The Slant works against us when it comes to roller tip rocker arms. The tip (and the valve stem) are the high point so it is hard to get oil up to that spot.
As noted, I install an oiler into the valve cover and pour oil right on the tips.
http://www.dutra.org/pictures/engine/pa ... -oiler.jpg
DD
Author:  Boostdragon [ Tue Nov 18, 2003 5:47 pm ]
Post subject: 
cool, thanks a lot, guys.
Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/