They are probably just like every other "precut" cage kit. The pieces are close to fitting, but have to be trimmed on installation.
We are using an Alston Duster kit in my car and it was reasonably close, but has required lots of "touch-up".
| Slant Six Forum https://slantsix.org/forum/ |
|
| rollcage https://slantsix.org/forum/viewtopic.php?t=7940 |
Page 1 of 1 |
| Author: | Guest [ Fri Dec 26, 2003 8:46 am ] |
| Post subject: | rollcage |
anyone had any experience with the precut roll cages that jegs sells |
|
| Author: | Dart270 [ Sat Jan 03, 2004 7:42 pm ] |
| Post subject: | |
What will the car be used for? Most kits people sell are crappy tubing (not DOM) so they are not legal for road racing (SCCA, NASA). I just had a custom 4 pt rollbar put in my '66 V100 (will upgrade to full cage later) for $400 installed. Lou |
|
| Author: | slantzilla [ Sat Jan 03, 2004 11:10 pm ] |
| Post subject: | |
They are probably just like every other "precut" cage kit. The pieces are close to fitting, but have to be trimmed on installation. We are using an Alston Duster kit in my car and it was reasonably close, but has required lots of "touch-up".
|
|
| Author: | Ron Parker [ Sun Jan 04, 2004 3:57 pm ] |
| Post subject: | |
Hey Bagel just talked to a metal fabicator and we are puting in the six point cage and all alunimun floor pans its a done deal . The car goes in next weekend he said we can pull off 100 pounds with that setup plus what im going to do to the car. Will help me breakout even more. This is Slant Six no hold um, and im all in ,for next year. Maybe some more suprises at the Banquit. Are you all in. Possum Parker  Ps i have found something i can burn better than a Bagel that is a Kiaser roll. stay tuned
|
|
| Author: | slantzilla [ Sun Jan 04, 2004 7:00 pm ] |
| Post subject: | |
Ron, we are making some progress on the Duster, but it is still light years away from being ready. At least we made it past the point when I wanted to cut it up for scrap.  I am committed to being at Clay City and St. Louis. The rest we will play by ear.
|
|
| Author: | Will [ Tue Jan 06, 2004 12:14 am ] |
| Post subject: | |
www.whipassracing.com |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|