I am looking for information on Doug Dutra's lower control arm travel limiter. How does it work and where can it be purchased?
| Slant Six Forum https://slantsix.org/forum/ |
|
| Dutra Disk https://slantsix.org/forum/viewtopic.php?t=8186 |
Page 1 of 1 |
| Author: | Rich V [ Thu Jan 22, 2004 10:56 am ] |
| Post subject: | Dutra Disk |
I am looking for information on Doug Dutra's lower control arm travel limiter. How does it work and where can it be purchased?
|
|
| Author: | Doc [ Thu Jan 22, 2004 11:47 am ] |
| Post subject: | |
I'm not sure if I understand what "travel limiter" means. I have made-up special inserts that keeps the LCA "pin" from slipping-out of poly bushings. Here is a photo link: http://www.dutra.org/pictures/parts/dutra-disc-lca.jpg DD |
|
| Author: | Guest [ Thu Jan 22, 2004 2:46 pm ] |
| Post subject: | |
The travel I am referenced is the fore and aft motion of the control arm. So does the shoulder on the disk bear against the bushing shell or something else? |
|
| Author: | Doctor Dodge [ Thu Jan 22, 2004 9:28 pm ] |
| Post subject: | |
The Disc seats on a large shoulder inside the torsion bar / control arm bushing socket. With the disc installed there is no chance of fore/aft movement of the control arm on the pin. DD |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|
